EUVIMEDEUVIMED entdecken
Crossref

Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications

Yuxin Liu iD, Jinfeng Zhang iD, António Benjamim Mapossa, Uttandaraman Sundararaj iD

Environmental Science & Technology · 28.04.2026 · 60 (16) · 12610-12622

DOI: 10.1021/acs.est.5c17954 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Science & Technology, online erschienen am 14.04.2026. Verfasst von Yuxin Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada. Hauptthemen laut MEDLINE: Electronic Waste. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Alberta Innovates, Natural Sciences and Engineering Research Council of Canada (NSERC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a sustainable approach to resole-type phenolic resins using recycled pyrolysis oil derived from the nonmetallic fraction (NMF) of waste printed circuit boards (WPCBs). GC-MS confirmed phenol and phenolic derivatives in the recycled pyrolysis oil, providing suitable monomers. Among the tested conditions (300, 400, 500 °C), pyrolysis at 400 °C maximized both recycled pyrolysis oil yield and phenolic content. Resins were synthesized using recycled pyrolysis oil, pure phenol, and formaldehyde across recycled pyrolysis oil-to-phenol ratios from 100R-0P to 0R-100P, and their synthesis behavior, mechanical performance, thermal stability, and flame retardancy were comprehensively characterized. A novel mechanism is proposed, in which, under basic conditions, phenolic species form methylol phenols that condense via ether and methylene linkage, as confirmed by FTIR analysis, while nonphenolic and sterically hindered compounds limit apparent network rigidity. Flame retardancy was evaluated by the limiting oxygen index (LOI), which reached 42.3% for 0R-100P and 27.0% for 100R-0P. Formulations containing up to 40 wt % recycled pyrolysis oil retained over 82% of the tensile properties and 87% of impact resistance compared to the virgin resin. These findings highlight the feasibility of converting e-waste into value-added, high-performance, and flame-retardant thermosets, offering a viable route toward circular material innovation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Electronic WastePhenolsRecyclingPyrolysisFlame RetardantsGas Chromatography-Mass Spectrometry

Stichwörter der Autor:innen

electronic-wasteflame retardantnonmetallic fractionpyrolysisrecyclingresole-type phenolic resinvalorization

Substanzen

PhenolsFlame Retardants

Autor:innen und Institutionen

  • Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.

ORCID-Profile: Yuxin Liu, Jinfeng Zhang, Uttandaraman Sundararaj

Förderung

  • Alberta Innovates
  • Natural Sciences and Engineering Research Council of Canada (NSERC)

Zitieren

APA

Liu, Y., Zhang, J., Mapossa, A. B., & Sundararaj, U. (2026). Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications. Environmental Science & Technology, 60(16), 12610-12622. https://doi.org/10.1021/acs.est.5c17954

Vancouver

Liu Y, Zhang J, Mapossa AB, Sundararaj U. Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications. Environmental Science & Technology. 2026;60(16):12610-12622. doi:10.1021/acs.est.5c17954

BibTeX
@article{Liu2026,
  author = {Liu, Yuxin and Zhang, Jinfeng and Mapossa, António Benjamim and Sundararaj, Uttandaraman},
  title = {Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications},
  journal = {Environmental Science & Technology},
  year = {2026},
  volume = {60},
  number = {16},
  pages = {12610--12622},
  doi = {10.1021/acs.est.5c17954}
}
Kostenlos starten →