EUVIMEDEUVIMED entdecken
Crossref

Assessing mechanical properties and biosafety of dental zirconia for 3D printing and CNC milling

Zhen Wu, Kang Han, XiaoJing Li, ZhongXiang Wei, XiongYu Wang, YaXin Han, JunXia Tan, Xin Liu

The Journal of Prosthetic Dentistry · 2026-07 · 136 (1) · e369-e378

DOI: 10.1016/j.prosdent.2026.02.039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026-07. Verfasst von Zhen Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Graduate student, School of Stomatology, The First Affiliated Hospital of Harbin Medical University, Harbin, PR China. Hauptthemen laut MEDLINE: Zirconium, Printing, Three-Dimensional, Dental Materials. Die Arbeit nennt 54 Literaturangaben. Gefördert von: Heilongjiang Provincial Postdoctoral Science Foundation, Heilongjiang Province Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM The mechanical properties and biocompatibility of 3-dimensionally (3D) printed dental ceramics require further investigation to provide a theoretical basis for clinical application. PURPOSE The purpose of this in vitro study was to evaluate and compare the mechanical properties and biocompatibility of zirconia fabricated by 3D printing and conventional computer numerical control (CNC) milling. MATERIAL AND METHODS Zirconia specimens were fabricated by 3D printing and CNC milling. The crystalline phase (CP) and surface roughness (SR) were assessed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) (n=5). Flexural strength (FS), fracture toughness (FT), and Vickers hardness (HV) were examined with a universal testing machine and Vickers microhardness tester (n=5). Cell viability was assessed by using the CCK-8 assay and bone marrow stromal cells (BMSCs), with 5 replicate wells per group. The mechanical property tests and CCK-8 assay were independently repeated 3 times. In vivo biocompatibility was assessed by acute oral toxicity testing in Sprague-Dawley rats (n=5) and mucosal irritation evaluation in golden hamsters (n=10). Data are presented as mean ±standard deviation (t test or 1-way analysis of variance) or median (nonparametric tests) (α=.05). RESULTS Three-dimensionally printed zirconia possessed a rougher surface with a microporous structure compared with CNC milled zirconia. Both ceramics were primarily in the tetragonal phase, with the 3D printing zirconia exhibiting broader and lower-intensity peaks. The CNC milled zirconia demonstrated significantly higher FS than the 3D printed zirconia (P .05). No meaningful systemic toxicity or mucosal irritation was observed in short-term animal models. CONCLUSIONS Three-dimensionally printed zirconia ceramics exhibit better toughness, hardness, and short-time biosafety. The flexural strength preliminarily meets the clinical requirements for low-stress restorations, providing a theoretical foundation for the future clinical application of 3D printed zirconia restorations. Further research and optimization of manufacturing processes are needed to meet the demands of high stress and long-term clinical application.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumPrinting, Three-DimensionalDental MaterialsAnimalsRatsRats, Sprague-DawleyMaterials TestingSurface PropertiesMicroscopy, Electron, ScanningHardnessCell SurvivalCricetinaeBiocompatible MaterialsX-Ray Diffraction

Substanzen

Zirconiumzirconium oxideDental MaterialsBiocompatible Materials

Autor:innen und Institutionen

  • Graduate student, School of Stomatology, The First Affiliated Hospital of Harbin Medical University, Harbin, PR China.
  • Associate Professor and Deputy Head, Department of Prosthodontics, School of Stomatology, The First Affiliated Hospital of Harbin Medical University, Harbin, PR China. Electronic address: eros_l@163.com.

Förderung

  • Heilongjiang Provincial Postdoctoral Science Foundation
  • Heilongjiang Province Natural Science Foundation

Zitieren

APA

Wu, Z., Han, K., Li, X., Wei, Z., Wang, X., Han, Y., Tan, J., & Liu, X. (2026). Assessing mechanical properties and biosafety of dental zirconia for 3D printing and CNC milling. The Journal of Prosthetic Dentistry, 136(1), e369-e378. https://doi.org/10.1016/j.prosdent.2026.02.039

Vancouver

Wu Z, Han K, Li X, Wei Z, Wang X, Han Y, et al. Assessing mechanical properties and biosafety of dental zirconia for 3D printing and CNC milling. The Journal of Prosthetic Dentistry. 2026;136(1):e369-e378. doi:10.1016/j.prosdent.2026.02.039

BibTeX
@article{Wu2026,
  author = {Wu, Zhen and Han, Kang and Li, XiaoJing and Wei, ZhongXiang and Wang, XiongYu and Han, YaXin and Tan, JunXia and Liu, Xin},
  title = {Assessing mechanical properties and biosafety of dental zirconia for 3D printing and CNC milling},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2026},
  volume = {136},
  number = {1},
  pages = {e369--e378},
  doi = {10.1016/j.prosdent.2026.02.039}
}
Kostenlos starten →