Influence of three chemical disinfection protocols on the mechanical, physical, and cytotoxic properties of additively manufactured complete denture bases with and without soft reline resin: An in vitro study
The Journal of Prosthetic Dentistry · 2026
DOI: 10.1016/j.prosdent.2026.01.005 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026. Verfasst von Adam Abed und 4 weiteren Autor:innen. Beteiligte Einrichtung: Head of Clinic, Department of Prosthodontics, Faculty of Dental Surgery, Université de Lille, CHU Lille, Lille, France; Full Professor, Department of…. Hauptthemen laut MEDLINE: Dental Materials, Denture Bases, Denture Rebasing, Disinfection. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Additive manufacturing using stereolithography (SLA) has emerged as a promising method of manufacturing complete denture bases. However, patients wearing these prostheses often require tissue conditioning and regular disinfection. While chemical disinfectants have been widely used in clinical practice, their effects on the mechanical properties and cytotoxicity of relined SLA-manufactured dentures are not well established, and a standardized disinfection protocol is unavailable. PURPOSE: The purpose of this in vitro study was to evaluate the effects of 3 chemical disinfection protocols on the mechanical, physical, and cytotoxic properties of complete denture base resins manufactured by SLA, with or without resilient resin. MATERIAL AND METHODS: A total of 168 specimens were prepared and divided into 6 groups (n=14 per condition). SLA-manufactured denture base specimens (Denture Base; Formlabs) were either left nonrelined (SLA-NR) or relined with a soft tissue-conditioning acrylic resin (GC Tissue Conditioner; GC) (SLA-R). The disinfection protocols were 2% glutaraldehyde (2 minutes), 0.3% peracetic acid (1 minute), and alkaline peroxide-based effervescent tablets (3 minutes), applied in 6 cycles. Control groups had no disinfection. Cytotoxicity and mechanical and physical properties were assessed with 3-point flexural strength, fracture toughness, surface roughness, Vickers hardness, and Shore A hardness. Statistical analysis included normality testing (Kolmogorov-Smirnov), ANOVA with Tukey post hoc tests for parametric data, and Kruskal-Wallis with Dunn post hoc tests for nonparametric data (α=.05). RESULTS: A flexural strength of 64.53 ±10.12 MPa in SLA-R specimens disinfected with glutaraldehyde was not significantly different from controls (66.34 ±10.76 MPa; P=.93). However, peracetic acid (58.61 ±9.50 MPa) and effervescent tablets (60.13 ±10.56 MPa) caused significant reductions (P .05). All relined specimens showed 0% cell viability, while nonrelined specimens maintained 98% to 100% viability (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Head of Clinic, Department of Prosthodontics, Faculty of Dental Surgery, Université de Lille, CHU Lille, Lille, France; Full Professor, Department of Prosthodontics, Faculty of Dental Surgery, INSERM U1008, Université d…
- Master's student, Université de Lille, France; Full Professor, Department of Prosthodontics, Faculty of Dental Surgery, INSERM U1008, Université de Lille, CHU Lille, Lille, France.
- Research Engineer, INSERM U1008, Université de Lille, Lille, France; Full Professor, Department of Prosthodontics, Faculty of Dental Surgery, INSERM U1008, Université de Lille, CHU Lille, Lille, France.
- Research Engineer, CERAMATHS, Polytechnic University of Hauts-de-France (UPHF), Maubeuge, France; Full Professor, Department of Prosthodontics, Faculty of Dental Surgery, INSERM U1008, Université de Lille, CHU Lille, Li…
Zitieren
APA
Abed, A., Hatte, L., Maton, M., Jorgowski, B., & Dehurtevent, M. (2026). Influence of three chemical disinfection protocols on the mechanical, physical, and cytotoxic properties of additively manufactured complete denture bases with and without soft reline resin: An in vitro study. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2026.01.005
Vancouver
Abed A, Hatte L, Maton M, Jorgowski B, Dehurtevent M. Influence of three chemical disinfection protocols on the mechanical, physical, and cytotoxic properties of additively manufactured complete denture bases with and without soft reline resin: An in vitro study. The Journal of Prosthetic Dentistry. 2026. doi:10.1016/j.prosdent.2026.01.005
BibTeX
@article{Abed2026,
author = {Abed, Adam and Hatte, Loïc and Maton, Mickaël and Jorgowski, Benoit and Dehurtevent, Marion},
title = {Influence of three chemical disinfection protocols on the mechanical, physical, and cytotoxic properties of additively manufactured complete denture bases with and without soft reline resin: An in vitro study},
journal = {The Journal of Prosthetic Dentistry},
year = {2026},
doi = {10.1016/j.prosdent.2026.01.005}
}
EUVIMED