EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access

Comparative evaluation of the effects of laser and chemical denture disinfectants on the surface characteristics of CAD‐CAM and conventional denture resins: An in vitro experimental study

Rania Moussa iD, Passent Ellakany iD, Shaimaa M Fouda iD, Mai Salah El-Din iD

Journal of Prosthodontics · 2026

DOI: 10.1111/jopr.13952 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Prosthodontics, 2026. Verfasst von Rania Moussa und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Substitutive Dental Sciences, College of Dentistry, Taibah University, Al-Madinah Al-Munawwarah, Saudi Arabia. Hauptthemen laut MEDLINE: Computer-Aided Design, Denture Bases, Dental Materials, Dental Disinfectants. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The purpose of this study was to assess the effect of Ga‐Al‐Ar diode, Nd:YAG lasers, and chemical disinfectants (NaOCl, vinegar, and Corega) on surface roughness (Ra) and hardness (VHN) of polymethylmethacrylate (PMMA), thermoplastic polyamide, milled and 3D‐printed denture base resins. Materials and Methods About 432 specimens of PMMA, thermoplastic polyamide, milled, and 3D‐printed resins were divided into six subgroups (n = 18): distilled water (control:C), Ga‐Al‐Ar diode laser (L1), Nd:YAG laser (L2), 1% sodium hypochlorite (NaOCl), vinegar (AA), and Corega (CR). Each specimen's Ra and VHN were measured. Surface topography assessment was done using scanning electron microscopy (SEM). Analysis was done using ANOVA and post hoc Tukey's test ( p = 0.05).

Results

A significant difference was noted in Ra and VHN as affected by denture base materials, surface disinfectants, and their interaction ( p < 0.001). Results showed a significant increase in Ra of PMMA with NaOCL ( p < 0.001), AA ( p = 0.005), and CR ( p = 0.009), thermoplastic polyamide with L1 ( p = 0.012), L2 ( p = 0.015), NaOCL AA, and CR ( p < 0.001 each), milled resin with AA NaOCL, and CR ( p < 0.001 each), and 3D‐printed resin with L1, NaOCl, AA ( p < 0.001 each), and CR ( p = 0.008). The VHN increased in PMMA with NaOCL ( p < 0.001), AA ( p = 0.044), and CR ( p < 0.001), thermoplastic polyamide with L1 ( p = 0.037), milled resin with L1, L2, and CR ( p < 0.001 each), and 3D‐printed resin with L1, NaOCl ( p < 0.001 each), and decreased with CR ( p = 0.007).

Conclusion

The tested properties showed variations affected by denture base material and surface disinfectants. Laser treatments induced smoother surfaces than chemical disinfectants. Laser improved the surface hardness of CAD‐CAM resins, while chemical immersion improved that of PMMA.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignDenture BasesDental MaterialsDental DisinfectantsAcrylic ResinsSurface PropertiesPolymethyl MethacrylateLasers, Solid-StateSodium HypochloriteMicroscopy, Electron, ScanningMaterials TestingNylonsHardnessAcetic AcidLasers, SemiconductorHumansLasers, GasDenture Cleansers

Stichwörter der Autor:innen

CAD‐CAMPMMAdenture cleanserslasersurface properties

Substanzen

Polymethyl MethacrylateSodium HypochloriteNylonscorega tabsAcetic AcidDental MaterialsDental DisinfectantsAcrylic ResinsDenture Cleansers

Autor:innen und Institutionen

  • Department of Substitutive Dental Sciences, College of Dentistry, Taibah University, Al-Madinah Al-Munawwarah, Saudi Arabia.
  • Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia.
  • Department of Prosthodontics, Alexandria University Main Hospital, Alexandria, Egypt.

ORCID-Profile: Rania Moussa, Passent Ellakany, Shaimaa M Fouda, Mai Salah El-Din

Zitieren

APA

Moussa, R., Ellakany, P., Fouda, S. M., & El-Din, M. S. (2026). Comparative evaluation of the effects of laser and chemical denture disinfectants on the surface characteristics of CAD‐CAM and conventional denture resins: An in vitro experimental study. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13952

Vancouver

Moussa R, Ellakany P, Fouda SM, El-Din MS. Comparative evaluation of the effects of laser and chemical denture disinfectants on the surface characteristics of CAD‐CAM and conventional denture resins: An in vitro experimental study. Journal of Prosthodontics. 2026. doi:10.1111/jopr.13952

BibTeX
@article{Moussa2026,
  author = {Moussa, Rania and Ellakany, Passent and Fouda, Shaimaa M and El-Din, Mai Salah},
  title = {Comparative evaluation of the effects of laser and chemical denture disinfectants on the surface characteristics of CAD‐CAM and conventional denture resins: An in vitro experimental study},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.13952}
}
Kostenlos starten →