EUVIMEDEUVIMED entdecken
Crossref

The effect of hydrofluoric acid treatment on the repair strength of polyamide denture base materials: An in vitro study

Özer İşisağ iD

Journal of Prosthodontics · 2024

DOI: 10.1111/jopr.13804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2024. Verfasst von Özer İşisağ. Beteiligte Einrichtung: Department of Prosthodontics, Afyonkarahisar University of Health Sciences Faculty of Dentistry, Afyonkarahisar, Turkey. Hauptthemen laut MEDLINE: Denture Bases, Nylons, Polymethyl Methacrylate, Shear Strength. Die Arbeit nennt 21 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Although polymethylmethacrylate (PMMA) dentures can be repaired using autopolymerizing acrylic resin, achieving it using polyamides is difficult. This study aimed to achieve acceptable bond strength using autopolymerizing acrylic resin by applying surface treatments to the polyamide denture base material. Materials and methods Thirty‐six disc‐shaped samples (27 polyamide, 9 PMMA) were prepared. Based on the surface treatment applied, the polyamide samples were divided into three groups: No surface treatment ( n = 9), tribochemical silica coating + silane coupling agent ( n = 9), and 9% hydrofluoric acid + tribochemical silica coating +silane coupling agent ( n = 9). PMMA specimens received no surface treatment. Polyamide and PMMA surfaces had auto‐polymerizing acrylic resin bonded on them, and then a shear bond strength test was performed between them after aging. The Kruskal–Wallis test was used, and statistical significance was set at p < 0.05.

Results

PMMA had the highest shear bond strength, the untreated polyamide group had the lowest shear bond strength, and the difference was significant ( p < 0.05). The group treated with 9% hydrofluoric acid, tribochemical silica coating, and silane coupling agent exhibited the highest shear bond strength of the polyamide groups, and the bond strength in this group was comparable to the PMMA specimens ( p > 0.05).

Conclusions

The polyamide denture repair strength can be improved by 9% hydrofluoric acid, tribochemical silica coating, and silane coupling agent application to the polyamide surface.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Denture BasesNylonsPolymethyl MethacrylateShear StrengthHydrofluoric AcidMaterials TestingSurface PropertiesDental Stress AnalysisIn Vitro TechniquesDental BondingAcrylic ResinsDental MaterialsHumansDenture Repair

Stichwörter der Autor:innen

PMMAautopolymerizing resindenture repairhydrofluoric acidpolyamide

Substanzen

NylonsPolymethyl MethacrylateHydrofluoric AcidAcrylic ResinsDental Materials

Autor:innen und Institutionen

  • Department of Prosthodontics, Afyonkarahisar University of Health Sciences Faculty of Dentistry, Afyonkarahisar, Turkey.

ORCID-Profile: Özer İşisağ

Zitieren

APA

İşisağ, Ö. (2024). The effect of hydrofluoric acid treatment on the repair strength of polyamide denture base materials: An in vitro study. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13804

Vancouver

İşisağ Ö. The effect of hydrofluoric acid treatment on the repair strength of polyamide denture base materials: An in vitro study. Journal of Prosthodontics. 2024. doi:10.1111/jopr.13804

BibTeX
@article{isa2024,
  author = {İşisağ, Özer},
  title = {The effect of hydrofluoric acid treatment on the repair strength of polyamide denture base materials: An in vitro study},
  journal = {Journal of Prosthodontics},
  year = {2024},
  doi = {10.1111/jopr.13804}
}
Kostenlos starten →