Impact of implant abutment connection designs and cyclic loading on screw stability in dental implants: A systematic review and meta-analysis
The Journal of Prosthetic Dentistry · 2026-02 · 135 (2) · 317.e1-317.e14
DOI: 10.1016/j.prosdent.2025.09.035 ↗Kurz gefasst
Systematische Übersicht in der Zeitschrift The Journal of Prosthetic Dentistry, 2026-02. Verfasst von Sara Reda Sammour und 3 weiteren Autor:innen. Beteiligte Einrichtung: PhD student, Division of Advanced Prosthetic Dentistry, Tohoku University, Graduate School of Dentistry, Sendai, Japan; Assistant lecturer, Prosthodo…. Hauptthemen laut MEDLINE: Dental Implant-Abutment Design, Dental Implants, Dental Abutments, Dental Prosthesis Retention. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Screw loosening is a common mechanical complication that can compromise the long-term success of implant-supported restorations. Implant-abutment connection design and cyclic loading influence load transfer, preload retention, and joint stability; however, their specific contributions to screw loosening under functional conditions remain unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the effect of implant-abutment connection geometry on abutment screw stability under cyclic mechanical loading. MATERIAL AND METHODS: This manuscript followed the Preferred Reporting Items for the Systematic Review and Meta-Analyses (PRISMA) statement. Electronic searches were conducted in the PubMed, Scopus, and Web of Science databases for in vitro studies assessing screw loosening after cyclic loading. Studies that evaluated implant-abutment assemblies with clearly specified connection designs using commercially available implants were included. Two reviewers independently screened and extracted data and assessed methodological quality. Random-effects meta-analyses were performed to estimate the mean removal torque loss ratio for each connection type. Meta-regression explored potential sources of heterogeneity. Designs not suitable for meta-analysis were evaluated qualitatively. RESULTS: A total of 21 in vitro studies met the inclusion criteria. Most applied cyclic loading ranging from 50 000 to 3 000 000 cycles, with forces between 100 and 300 N. Meta-analysis of studies on external hexagon connections revealed a significant pooled torque loss of 23.9% (P=.016) with high heterogeneity (I²=87.6%). The pooled torque loss was 19.2% for the internal hexagon (P=.074), 16.6% for Morse taper (P=.057), and 16.0% for conical connections (P>.05). Narrative synthesis indicated that hybrid conical connections retained preload more effectively than conventional internal hexagon designs. Angled abutments increased torque loss, and Morse taper hybrids generally showed superior stability. CONCLUSIONS: All connection types experienced preload loss under cyclic loading, with external hexagon systems showing the greatest average loss. Conical and Morse taper designs preserved preload better than flat-to-flat hexagon connections. Mechanical stability was affected by connection geometry, abutment angulation, and screw material.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- PhD student, Division of Advanced Prosthetic Dentistry, Tohoku University, Graduate School of Dentistry, Sendai, Japan; Assistant lecturer, Prosthodontic department, Faculty of Dentistry, Tanta University, Tanta, Egypt.
- PhD student, Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai, Japan.
- Professor, Division of Comprehensive Dentistry, Tohoku University Graduate School of Dentistry, Sendai, Japan.
- Professor, Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai, Japan. Electronic address: nobuhiro.yoda.e2@tohoku.ac.jp.
Zitieren
APA
Sammour, S. R., Ziqi, X., Ogawa, T., & Yoda, N. (2026). Impact of implant abutment connection designs and cyclic loading on screw stability in dental implants: A systematic review and meta-analysis. The Journal of Prosthetic Dentistry, 135(2), 317.e1-317.e14. https://doi.org/10.1016/j.prosdent.2025.09.035
Vancouver
Sammour SR, Ziqi X, Ogawa T, Yoda N. Impact of implant abutment connection designs and cyclic loading on screw stability in dental implants: A systematic review and meta-analysis. The Journal of Prosthetic Dentistry. 2026;135(2):317.e1-317.e14. doi:10.1016/j.prosdent.2025.09.035
BibTeX
@article{Sammour2026,
author = {Sammour, Sara Reda and Ziqi, Xie and Ogawa, Toru and Yoda, Nobuhiro},
title = {Impact of implant abutment connection designs and cyclic loading on screw stability in dental implants: A systematic review and meta-analysis},
journal = {The Journal of Prosthetic Dentistry},
year = {2026},
volume = {135},
number = {2},
pages = {317.e1--317.e14},
doi = {10.1016/j.prosdent.2025.09.035}
}
EUVIMED