EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of abutment types on the success of two-unit implant-supported fixed dental prostheses: A three-dimensional finite element analysis and fatigue test combined with microleakage evaluation

Piaopiao Qiu, Rongkai Cao, Jiaxiu Dai, Si Zhou, Xiaoli Yan, Zhen Fan

The Journal of Prosthetic Dentistry · 2025

DOI: 10.1016/j.prosdent.2025.06.006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025. Verfasst von Piaopiao Qiu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Graduate student, Shanghai Engineering Research Center of Tooth Restoration and Regeneration & Tongji Research Institute of Stomatology & Department …. Hauptthemen laut MEDLINE: Dental Prosthesis, Implant-Supported, Dental Abutments, Dental Implant-Abutment Design, Dental Leakage. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Implant-supported splinted prostheses have been widely used to rehabilitate partial edentulism. However, few studies have investigated how different abutment types affect stress distribution in dental implants and the surrounding bone structures of splinted crowns. In addition, which combination of abutments helps reduce microleakage at the abutment-implant interface the most is unclear. PURPOSE: The purpose of this study was to assess the impact of various implant abutment combinations for 2-unit implant-supported fixed prostheses on the implants and surrounding bone by using 3-dimensional finite element analysis (FEA) and to determine the microleakage of implants after fatigue testing. MATERIAL AND METHODS: A bone block representing the mandibular posterior region was created based on cone beam computed tomography (CBCT) data. The implants used were bone-level with an internal conical connection and platform-switching design (Institut Straumann AG), which were positioned in the bone block with 4 distinct abutment (Institut Straumann AG) combinations: 2 screw-retained abutments restored with screw-retained crowns, 2 cement-retained abutments restored with cemented crowns, 2 Variobase for Bridge/Bar Cylindrical abutments, and a combination of a Variobase for a crown abutment and a Variobase for a Bridge/Bar Cylindrical abutment. A 2-unit crown for the mandibular right first molar and second premolar was designed with static and dynamic loads applied at a 30-degree angle to evaluate implant-abutment interface deformation. Fatigue testing with microleakage evaluation validated the FEA results. One-way ANOVA analyzed between-group differences, repeated-measures ANOVA evaluated microbiological data, and post hoc comparisons used the least significant difference (LSD) tests (α=.05). RESULTS: The FEA results showed significant differences in implant-abutment interface displacement among the 4 groups, with the 2 screw-retained abutment group demonstrating the least displacement (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental Prosthesis, Implant-SupportedDental AbutmentsDental Implant-Abutment DesignDental LeakageFinite Element AnalysisHumansDental Stress AnalysisCone-Beam Computed TomographyImaging, Three-DimensionalCrownsDental Implants

Substanzen

Dental Implants

Autor:innen und Institutionen

  • Graduate student, Shanghai Engineering Research Center of Tooth Restoration and Regeneration & Tongji Research Institute of Stomatology & Department of Dental Implantation, Shanghai Tongji Stomatological Hospital and De…
  • Assistant Professor, Laboratory of Immunology and Pathogen Biology, School of Medicine, Tongji University, Shanghai, PR China.
  • Professor, Shanghai Engineering Research Center of Tooth Restoration and Regeneration & Tongji Research Institute of Stomatology & Department of Dental Implantation, Shanghai Tongji Stomatological Hospital and Dental Sc…

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Qiu, P., Cao, R., Dai, J., Zhou, S., Yan, X., & Fan, Z. (2025). Influence of abutment types on the success of two-unit implant-supported fixed dental prostheses: A three-dimensional finite element analysis and fatigue test combined with microleakage evaluation. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2025.06.006

Vancouver

Qiu P, Cao R, Dai J, Zhou S, Yan X, Fan Z. Influence of abutment types on the success of two-unit implant-supported fixed dental prostheses: A three-dimensional finite element analysis and fatigue test combined with microleakage evaluation. The Journal of Prosthetic Dentistry. 2025. doi:10.1016/j.prosdent.2025.06.006

BibTeX
@article{Qiu2025,
  author = {Qiu, Piaopiao and Cao, Rongkai and Dai, Jiaxiu and Zhou, Si and Yan, Xiaoli and Fan, Zhen},
  title = {Influence of abutment types on the success of two-unit implant-supported fixed dental prostheses: A three-dimensional finite element analysis and fatigue test combined with microleakage evaluation},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2025},
  doi = {10.1016/j.prosdent.2025.06.006}
}
Kostenlos starten →