Comparison of marginal and internal fit of 10-unit fixed dental prostheses fabricated from cobalt chromium alloys or zirconia ceramics using digital workflows
The Journal of Prosthetic Dentistry · 2025
DOI: 10.1016/j.prosdent.2025.05.008 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift The Journal of Prosthetic Dentistry, 2025. Verfasst von Vera Malina Hupe und 3 weiteren Autor:innen. Beteiligte Einrichtung: Doctoral student, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité - Universitätsmedizin Berlin, corporate m…. Hauptthemen laut MEDLINE: Zirconium, Computer-Aided Design, Chromium Alloys, Dental Marginal Adaptation. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Long-span fixed dental prostheses (FDPs) can be challenging to fabricate with adequate marginal and internal fit. The performance of restorations fabricated from cobalt chromium or zirconia using a completely digital workflow requires further evaluation to ensure clinical acceptability. PURPOSE: The purpose of this in vitro study was to evaluate and compare the marginal and internal fit of 10-unit FDPs fabricated from cobalt chromium or zirconia by using digital scanning and computer-aided design and computer-aided manufacturing (CAD-CAM). MATERIAL AND METHODS: Twenty-four complete arch digital scans of a typodont model with 6 prepared teeth were acquired to design and mill 12 cobalt chromium and 12 zirconia 10-unit FDP frameworks. For each framework, measurements from all 6 abutments and from both buccolingual and mesiodistal sections were pooled, yielding 1 mean value per measurement area per specimen. Marginal, chamfer, internal, and overall cement gaps were evaluated with the silicone replica technique. Trueness was defined as the difference between the measured gap and the preset cement spacer. Data were analyzed with 2-sample t tests on the pooled specimen means (α=.05). RESULTS: Mean gap measurements for cobalt chromium versus zirconia were (gap value ±standard deviation) as follows: marginal, 68.7 ±14.6 µm versus 53.3 ±11.8 µm; chamfer, 66.8 ±10.6 µm versus 58.1 ±10.8 µm; internal, 77.7 ±6.5 µm versus 95.8 ±9.4 µm; and overall cement gap, 74.2 ±8.2 µm versus 81.3 ±9.7 µm. The zirconia restorations exhibited a significantly smaller marginal gap (P=.01), whereas the cobalt chromium frameworks showed a significantly smaller internal gap (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Doctoral student, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité - Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Universität zu Berlin,…
- Full Professor and Department Head, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité - Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Unive…
- Assistant Professor, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité - Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Universität zu Berli…
Zitieren
APA
Hupe, V. M., Beuer, F., Sterzenbach, G., & Adali, U. (2025). Comparison of marginal and internal fit of 10-unit fixed dental prostheses fabricated from cobalt chromium alloys or zirconia ceramics using digital workflows. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2025.05.008
Vancouver
Hupe VM, Beuer F, Sterzenbach G, Adali U. Comparison of marginal and internal fit of 10-unit fixed dental prostheses fabricated from cobalt chromium alloys or zirconia ceramics using digital workflows. The Journal of Prosthetic Dentistry. 2025. doi:10.1016/j.prosdent.2025.05.008
BibTeX
@article{Hupe2025,
author = {Hupe, Vera Malina and Beuer, Florian and Sterzenbach, Guido and Adali, Ufuk},
title = {Comparison of marginal and internal fit of 10-unit fixed dental prostheses fabricated from cobalt chromium alloys or zirconia ceramics using digital workflows},
journal = {The Journal of Prosthetic Dentistry},
year = {2025},
doi = {10.1016/j.prosdent.2025.05.008}
}
EUVIMED