EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of surface treatment on the bond strength of chairside hard liners bonded to traditional and contemporary CAD-CAM denture base polymers

Abdullah M Aldosari, Francisco X Azpiazu-Flores, Shereen Azer, Scott R Schricker, Damian Lee, William M Johnston

The Journal of Prosthetic Dentistry · 2025

DOI: 10.1016/j.prosdent.2025.04.010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025. Verfasst von Abdullah M Aldosari und 5 weiteren Autor:innen. Beteiligte Einrichtung: Former Prosthodontics Resident, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio; an…. Hauptthemen laut MEDLINE: Computer-Aided Design, Denture Liners, Denture Bases, Dental Bonding. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Research on the bonding between hard liners and contemporary computer-aided design and computer-aided manufacture (CAD-CAM) denture base polymers treated with different surface treatments is lacking. PURPOSE: The purpose of this in vitro study was to evaluate the tensile bond strength of 2 extensively used hard liners on specimens fabricated with heat-polymerized polymethylmethacrylate (PMMA), milled PMMA, and a photopolymer for 3-dimensional (3D) printing denture bases and to assess the effect of the surface treatment on the bond strength. MATERIAL AND METHODS: Denture base specimens were fabricated with 3 different denture base polymers (Lucitone 199; Dentsply Sirona, IvoBase CAD; Ivoclar AG, and NextDent Denture 3D+; NextDent B.V). Using a balanced full-factorial experimental design, specimens of each group were treated with 1 of 2 surface treatments: the manufacturer's bonding agent or a light-polymerized methacrylate primer (Visio.Link; bredent UK Ltd) and subsequently relined with GC Reline (GC America Inc) or MucoHard (Parkell Inc). All specimens underwent a thermocycling regime simulating 5 years of intraoral service. Subsequently, for specimens that survived the thermocycling, the tensile bond strength was evaluated with a universal testing machine. Data were analyzed using 3-way analysis of variance (ANOVA) and post hoc Bonferroni-corrected pairwise comparisons (α=.05). RESULTS: A significant 3-way interaction was found (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignDenture LinersDenture BasesDental BondingPolymersSurface PropertiesPolymethyl MethacrylateTensile StrengthHumansDental Stress AnalysisMaterials TestingIn Vitro TechniquesAcrylic ResinsPrinting, Three-Dimensional

Substanzen

Polymethyl MethacrylatePolymersAcrylic Resins

Autor:innen und Institutionen

  • Former Prosthodontics Resident, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio; and Assistant Professor, Department of Prosthetic Dental Science, Colleg…
  • Assistant Professor, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio. Electronic address: azpiazuflores.1@osu.edu.
  • Department Chair, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio.
  • Associate Professor and Director of Student Research, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio.
  • Department Chair, Department of Prosthodontics, Tufts School of Dental Medicine, Boston, Mass.
  • Professor Emeritus, Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio.

Zitieren

APA

Aldosari, A. M., Azpiazu-Flores, F. X., Azer, S., Schricker, S. R., Lee, D., & Johnston, W. M. (2025). Effect of surface treatment on the bond strength of chairside hard liners bonded to traditional and contemporary CAD-CAM denture base polymers. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2025.04.010

Vancouver

Aldosari AM, Azpiazu-Flores FX, Azer S, Schricker SR, Lee D, Johnston WM. Effect of surface treatment on the bond strength of chairside hard liners bonded to traditional and contemporary CAD-CAM denture base polymers. The Journal of Prosthetic Dentistry. 2025. doi:10.1016/j.prosdent.2025.04.010

BibTeX
@article{Aldosari2025,
  author = {Aldosari, Abdullah M and Azpiazu-Flores, Francisco X and Azer, Shereen and Schricker, Scott R and Lee, Damian and Johnston, William M},
  title = {Effect of surface treatment on the bond strength of chairside hard liners bonded to traditional and contemporary CAD-CAM denture base polymers},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2025},
  doi = {10.1016/j.prosdent.2025.04.010}
}
Kostenlos starten →