Durability of resin bonding to translucent zirconia materials: An in vitro study
The Journal of Prosthetic Dentistry · 2025-06 · 133 (6) · 1583.e1-1583.e8
DOI: 10.1016/j.prosdent.2025.03.017 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025-06. Verfasst von Abdulaziz Samran und 6 weiteren Autor:innen. Beteiligte Einrichtung: Visiting Associate Professor, Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, …. Hauptthemen laut MEDLINE: Zirconium, Dental Bonding, Yttrium, Resin Cements. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
STATEMENT OF PROBLEM: How the yttria content (3Y-PSZ, 4Y-PSZ and 5Y-PSZ) affects the tensile bond strength of luting resin to translucent zirconia ceramics is unclear. PURPOSE: The purpose of this in vitro study was to evaluate whether the bond strength of resin to translucent zirconia ceramics and its durability are influenced by the yttria content (3Y-PSZ, 4Y-PSZ and 5Y-PSZ). MATERIAL AND METHODS: Sixty-four disk-shaped specimens of zirconia ceramics were randomly allocated to 4 groups (n=16) with respect to the yttria concentration: GHT: 3 mol% yttria-partially stabilized zirconia 3Y-PSZ; GHTML: 3 mol% yttria-partially stabilized multilayered zirconia 3Y-PSZ; GSTML: 4 mol% yttria-partially stabilized zirconia 4Y-PSZ; and GUTML: 5 mol% yttria-partially stabilized zirconia 5Y-PSZ. For bonding, acrylic resin tubes were filled with composite resin and bonded to the zirconia disks using adhesive luting resin by following manufacturer's instructions. Half of each main group (n=8) was stored in water for 3 days at 37 °C. The other half was stored in water for 150 days with 37 500 thermocycles (5 to 55 °C). The tensile bond strength test was determined with a universal testing machine at a crosshead speed of 2 mm/minute using a chain loop for alignment. RESULTS: The tensile bond strength was not significantly affected by the yttria concentration of different zirconia materials (3Y-PSZ, 4Y-PSZ, and 5Y-PSZ, P=.17). The mean ±standard deviation failure loads for groups ranged from 24.1 ±2.6 MPa for the ultratranslucent multilayered zirconia (with thermocycling) to 52.7 ±5.4 MPa for the high translucent multilayered zirconia (without thermocycling). However, artificial aging adversely affected the tensile bond strength values for all tested zirconia systems (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Visiting Associate Professor, Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, Germany; Associate Professor, Department of Restorative and Prosthetic…
- Visiting Assistant Professor, Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, Germany.
- Assistant Professor, Department of Prosthodontics, RAK College of Dental Sciences, RAK Medical & Health Sciences University, Ras Al Khaimah, United Arab Emirates.
- Assistant Professor, Department of Prosthodontics, Propaedeutics and Dental Materials, Dental School, Christian-Albrechts University, Kiel, Germany; and Lecturer, Faculty of Dentistry, MSA University, Cairo, Egypt.
- Research Associate, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University, Kiel, Germany.
- Professor and Chairman, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University, Kiel, Germany.
Zitieren
APA
Samran, A., Ali, S., El Bahra, S., Hashem, A. W., Elbeshri, M., Wille, S., & Kern, M. (2025). Durability of resin bonding to translucent zirconia materials: An in vitro study. The Journal of Prosthetic Dentistry, 133(6), 1583.e1-1583.e8. https://doi.org/10.1016/j.prosdent.2025.03.017
Vancouver
Samran A, Ali S, El Bahra S, Hashem AW, Elbeshri M, Wille S, et al. Durability of resin bonding to translucent zirconia materials: An in vitro study. The Journal of Prosthetic Dentistry. 2025;133(6):1583.e1-1583.e8. doi:10.1016/j.prosdent.2025.03.017
BibTeX
@article{Samran2025,
author = {Samran, Abdulaziz and Ali, Shurouk and El Bahra, Shadi and Hashem, Ahmed Wagdy and Elbeshri, Mohamed and Wille, Sebastian and Kern, Matthias},
title = {Durability of resin bonding to translucent zirconia materials: An in vitro study},
journal = {The Journal of Prosthetic Dentistry},
year = {2025},
volume = {133},
number = {6},
pages = {1583.e1--1583.e8},
doi = {10.1016/j.prosdent.2025.03.017}
}
EUVIMED