EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Wear behavior of 3D printed, minimally invasive restorations: Clinical data after 24 months in function

Magda Doumit, Florian Beuer, Mats Wernfried Heinrich Böse, Alexey Unkovskiy, Jeremias Hey, Elisabeth Prause

The Journal of Prosthetic Dentistry · 2025-09 · 134 (3) · 662-669

DOI: 10.1016/j.prosdent.2025.03.014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025-09. Verfasst von Magda Doumit und 5 weiteren Autor:innen. Beteiligte Einrichtung: Doctoral student, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité-Universitätsmedizin Berlin, corporate mem…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Dental Restoration Wear, Dental Restoration, Permanent, Tooth Wear. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: The prevalence of pathological tooth wear and a reduced vertical dimension of occlusion has increased, but prosthetic rehabilitation concepts have been invasive, time-consuming, and expensive. How affordable, esthetic, and less invasive treatment concepts will perform remains unclear. PURPOSE: The purpose of this proof-of-concept clinical study was to evaluate the wear behavior of 3-dimensionally (3D) printed, minimally invasive restorations fabricated from a ceramic- reinforced composite resin material after 24 months in clinical function. MATERIAL AND METHODS: The study included 28 participants who received noninvasive 3D printed restorations made of a computer-aided design and computer aided-manufacturing (CAD-CAM) ceramic-reinforced composite resin material (n=352). Maximum occlusal height loss and mean profile loss were measured by using an intraoral scanner and a matching software program (Geomagic Control X; 3D systems) by 1 clinician. Scans were conducted at baseline and after 12 and 24 months. A descriptive statistical analysis, including mean values, medians, standard deviations (SDs) interquartile range and 95% confidence interval (95% CI) were conducted (α=.05). RESULTS: Maximum occlusal height loss and mean profile loss were analyzed. The molar restorations showed the highest mean values of maximum occlusal height loss after 12 (0.76 mm) and 24 (1.25 mm) months. The anterior restorations showed the lowest wear rates. In general, 123 restorations (35%) had material wear >0.5 mm and were classified as fractured after 24 months of clinical application. Most of the nonfractured restorations experienced localized material wear between 0.11 mm and 0.35 mm, whereas mean profile loss values varied between 0.05 mm and 0.11 mm. CONCLUSIONS: Three-dimensionally printed, noninvasive restorations manufactured from a ceramic-reinforced composite resin material showed considerable material wear after 2 years of clinical function, and the material appears suitable only for interim restorations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalDental Restoration WearDental Restoration, PermanentTooth WearDental Prosthesis DesignHumansComputer-Aided DesignComposite ResinsFemaleMaleMiddle AgedAdultCeramicsDental MaterialsProof of Concept Study

Substanzen

Composite ResinsDental Materials

Autor:innen und Institutionen

  • Doctoral student, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité-Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Universität zu Berlin, Be…
  • Full Professor and Department Head, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité-Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Univers…
  • Researcher, Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité-Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Universität zu Berlin, Berlin,…
  • Full Professor and Head of Department, Department of Prosthodontics, School of Dental Medicine, Martin-Luther-University, Halle, Germany.

Zitieren

APA

Doumit, M., Beuer, F., Böse, M. W. H., Unkovskiy, A., Hey, J., & Prause, E. (2025). Wear behavior of 3D printed, minimally invasive restorations: Clinical data after 24 months in function. The Journal of Prosthetic Dentistry, 134(3), 662-669. https://doi.org/10.1016/j.prosdent.2025.03.014

Vancouver

Doumit M, Beuer F, Böse MWH, Unkovskiy A, Hey J, Prause E. Wear behavior of 3D printed, minimally invasive restorations: Clinical data after 24 months in function. The Journal of Prosthetic Dentistry. 2025;134(3):662-669. doi:10.1016/j.prosdent.2025.03.014

BibTeX
@article{Doumit2025,
  author = {Doumit, Magda and Beuer, Florian and Böse, Mats Wernfried Heinrich and Unkovskiy, Alexey and Hey, Jeremias and Prause, Elisabeth},
  title = {Wear behavior of 3D printed, minimally invasive restorations: Clinical data after 24 months in function},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2025},
  volume = {134},
  number = {3},
  pages = {662--669},
  doi = {10.1016/j.prosdent.2025.03.014}
}
Kostenlos starten →