Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors
The Journal of Prosthetic Dentistry · 2024
DOI: 10.1016/j.prosdent.2024.04.020 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2024. Verfasst von Carlos A Jurado und 6 weiteren Autor:innen. Beteiligte Einrichtung: Associate Professor and Director, Operative Dentistry Division, The University of Tennessee Health Science Center, Memphis, Tenn. Hauptthemen laut MEDLINE: Dental Veneers, Crowns, Dental Porcelain, Incisor. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Minimally invasive treatments have gained popularity in recent years. However, research comparing the fracture resistance of lithium disilicate partial coverage veneer restorations with that of ceramic crowns is lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the fracture resistance of lithium disilicate restorations fabricated for preparations of various designs. The designs included veneer preparations with finish lines in the upper, middle, and lower third of the facial surface and ceramic crown preparations with margins in the lower third of the facial surface. All restorations were designed and fabricated using a chairside digital workflow. MATERIAL AND METHODS: Four maxillary right central incisor typodont teeth were prepared for partial coverage veneer preparation with the margin in the upper middle third of the facial surface (PU1/3); partial coverage veneer preparation with margin in lower middle third of the facial surface (PL1/3); complete coverage veneer preparation (CV) with margin in the cervical region; and ceramic crown (CC) preparation. Each preparation was scanned, and 15 casts were 3D printed from each scan. A total of 60 lithium disilicate restorations were fabricated (n=15 per group) using a chairside computer-aided design and computer-aided manufacturing (CAD-CAM) system (Primescan and MCXL). The different restorations were cemented to the 3D printed testing dies with a photopolymerizable resin cement. The specimens were artificially aged with 10 000 thermal cycles between 5 and 55 °C with a dwell time of 30 seconds and were loaded to failure using a universal testing machine. The maximum load to fracture was analyzed using a 1-way ANOVA and post hoc Tukey honestly significant difference (HSD) test (α=.05). Additionally, the fracture patterns of the specimens were evaluated with a stereomicroscope for descriptive purposes. RESULTS: The mean fracture resistance of the chairside CAD-CAM lithium disilicate veneers and ceramic crowns was statistically different depending on the design of the restoration (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Associate Professor and Director, Operative Dentistry Division, The University of Tennessee Health Science Center, Memphis, Tenn.
- Clinical Associate Professor, Restorative Dentistry Department, Temple University Kornberg School of Dentistry, Philadelphia, Pa.
- Associate Professor, Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa.
- ITI Scholar, Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, Ind. Electronic address: fazpiazu@iu.edu.
- Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Semmelweis University, Budapest, Hungary.
- Prosthodontic Resident, Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, Ind.
Zitieren
APA
Jurado, C. A., Mekled, S., Abuhammoud, S., Azpiazu-Flores, F. X., Vegh, D., Wang, T., & Morton, D. (2024). Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2024.04.020
Vancouver
Jurado CA, Mekled S, Abuhammoud S, Azpiazu-Flores FX, Vegh D, Wang T, et al. Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors. The Journal of Prosthetic Dentistry. 2024. doi:10.1016/j.prosdent.2024.04.020
BibTeX
@article{Jurado2024,
author = {Jurado, Carlos A and Mekled, Salwa and Abuhammoud, Salahaldeen and Azpiazu-Flores, Francisco X and Vegh, Daniel and Wang, Ting and Morton, Dean},
title = {Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors},
journal = {The Journal of Prosthetic Dentistry},
year = {2024},
doi = {10.1016/j.prosdent.2024.04.020}
}
EUVIMED