EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Fracture load of chairside CAD‐CAM veneers fabricated with pre‐and fully crystalized lithium disilicate ceramics

Carlos A Jurado iD, Jacquelyn S Yeh iD, Cristina M P Vidal, Seok-Hwan Cho iD, Salahaldeen Abuhammoud iD

Journal of Prosthodontics · 2025

DOI: 10.1111/jopr.13867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2025. Verfasst von Carlos A Jurado und 4 weiteren Autor:innen. Beteiligte Einrichtung: Division of Operative Dentistry, Department of General Dentistry, The University of Tennessee Health Science Center College of Dentistry, Memphis, Te…. Hauptthemen laut MEDLINE: Computer-Aided Design, Dental Porcelain, Dental Veneers, Ceramics. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: College of Dentistry at the University of Iowa/Students Research Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To evaluate the fracture load of chairside computer‐aided design and computer‐aided manufacturing (CAD‐CAM) veneers fabricated with two conventional pre‐crystallized and two fully crystallized lithium disilicate ceramic materials. Materials and Methods Seventy‐five chairside CAD‐CAM veneers (15 specimens/group) for maxillary right central incisors were fabricated with different lithium disilicate brands: (1) IPS e.max CAD; (2) Amber Mill; (3) Cerec Tessera; (4) n!ce Straumann; and (5) GC Initial LiSi Block. Restorations were cemented with resin luting cement (Variolink Esthetic, Ivoclar) to 3D‐printed resin dies. Bonded restorations received 5000 thermal cycles and then were loaded until fracture. Statistical analysis included One‐Way ANOVA.

Results

Conventional pre‐crystallized e.max CAD displayed the highest fracture load value (640 N), followed by fully‐crystallized n!ce Straumann (547 N), pre‐crystallized Cerec Tessera (503 N), pre‐crystallized Amber Mill (476 N), respectively; fully‐crystallized GC Initial LiSi Block (431 N) displayed the lowest values. When comparing the fracture load of recent lithium disilicate ceramic material to the e.max group, which acted as the control, significant differences were noted. The LiSi Block GC group, in particular, had considerably higher mean difference values (208.867, p < 0.001, 95% CI [89.63, 328.10]), as did the Amber Mill group (164.200, p = 0.002, 95% CI [44.96, 283.44]) and CEREC Tessera group (137.533, p = 0.016, 95% CI [18.30, 256.77]). The e.max and n!ce Straumann groups had no statistically significant differences in mean scores (92.933, p = 0.198, 95% CI [−26.30, 212.17]). These findings imply that the clinical performance of recent lithium disilicate veneers varies when compared to the e.max CAD group.

Conclusions

The fracture load of chairside CAD‐CAM lithium disilicate veneers for maxillary central incisors varies according to the type of ceramic brands. Conventional pre‐crystallized e.max CAD displayed higher fracture load than the recent pre‐ and fully‐crystallized lithium disilicate materials, emphasizing the significance of choosing the right product based on the desired clinical outcome.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignDental PorcelainDental VeneersCeramicsDental Prosthesis DesignDental Restoration FailureHumansDental Stress AnalysisCrystallizationIncisorMaterials Testing

Stichwörter der Autor:innen

CAD‐CAMfully‐crystallizedlithium disilicatepre‐crystallizedrestorationsveneers

Substanzen

Dental Porcelainlithia disilicate

Autor:innen und Institutionen

  • Division of Operative Dentistry, Department of General Dentistry, The University of Tennessee Health Science Center College of Dentistry, Memphis, Tennessee, USA.
  • The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA.
  • Department of Operative Dentistry, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA.
  • Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA.

ORCID-Profile: Carlos A Jurado, Jacquelyn S Yeh, Seok-Hwan Cho, Salahaldeen Abuhammoud

Förderung

  • College of Dentistry at the University of Iowa/Students Research Program

Zitieren

APA

Jurado, C. A., Yeh, J. S., Vidal, C. M. P., Cho, S. H., & Abuhammoud, S. (2025). Fracture load of chairside CAD‐CAM veneers fabricated with pre‐and fully crystalized lithium disilicate ceramics. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13867

Vancouver

Jurado CA, Yeh JS, Vidal CMP, Cho SH, Abuhammoud S. Fracture load of chairside CAD‐CAM veneers fabricated with pre‐and fully crystalized lithium disilicate ceramics. Journal of Prosthodontics. 2025. doi:10.1111/jopr.13867

BibTeX
@article{Jurado2025,
  author = {Jurado, Carlos A and Yeh, Jacquelyn S and Vidal, Cristina M P and Cho, Seok-Hwan and Abuhammoud, Salahaldeen},
  title = {Fracture load of chairside CAD‐CAM veneers fabricated with pre‐and fully crystalized lithium disilicate ceramics},
  journal = {Journal of Prosthodontics},
  year = {2025},
  doi = {10.1111/jopr.13867}
}
Kostenlos starten →