Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing
HardwareX · 2024-03 · 17 · e00515
DOI: 10.1016/j.ohx.2024.e00515 ↗Kurz gefasst
Fachartikel in der Zeitschrift HardwareX, 2024-03. Verfasst von Max J Sevcik und 11 weiteren Autor:innen. Beteiligte Einrichtung: Colorado School of Mines Department of Metallurgical and Materials Engineering, Mechanical Engineering, Colorado School of Mines, Golden, CO 80401, U…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lawrence Livermore National Laboratory, Laboratory Directed Research and Development.
Abstract (Originalsprache)
Material extrusion Additive Manufacturing (AM), is one of the most widely practiced methods of AM. Fused Filament Fabrication (FFF) is what most associate with AM, as it is relatively inexpensive, and highly accessible, involving feeding plastic filament into a hot-end that melts and extrudes from a nozzle as the toolhead moves along the toolpath. Direct Ink Write (DIW) 3D printing falls into this same category of AM, however is primarily practiced in laboratory settings to construct novel parts from flowable feedstock materials. DIW printers are relatively expensive and often depend on custom software to print a part, limiting user-specificity. There have been recent advancements in multi-material and functionally graded DIW, but the systems are highly custom and the methods used to achieve multi-material prints are openly available to the public. The following article outlines the construction and operation method of a DIW system that is capable of printing that can produce compositionally-graded components using a dual feed progressive cavity pump extruder equipped with a dynamic mixer. The extruder and its capabilities to vary material composition while printing are demonstrated using a Prusa i3 MK3S+ desktop fused filament fabrication printer as the gantry system. This provides users ease of operation, and the capability of further tailoring to specific needs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Colorado School of Mines Department of Metallurgical and Materials Engineering, Mechanical Engineering, Colorado School of Mines, Golden, CO 80401, United States of America.
- Lawrence Livermore National Laboratory, Livermore, CA 94550, United States of America.
Förderung
- Lawrence Livermore National Laboratory
- Laboratory Directed Research and Development
Zitieren
APA
Sevcik, M. J., Golson, J., Bjerke, G., Snyder, I., Taylor, G., Wilson, F., Rabinowitz, G. I., Kline, D. J., Grapes, M. D., Sullivan, K. T., Belof, J. L., & Eliasson, V. (2024). Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing. HardwareX, 17, e00515. https://doi.org/10.1016/j.ohx.2024.e00515
Vancouver
Sevcik MJ, Golson J, Bjerke G, Snyder I, Taylor G, Wilson F, et al. Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing. HardwareX. 2024;17:e00515. doi:10.1016/j.ohx.2024.e00515
BibTeX
@article{Sevcik2024,
author = {Sevcik, Max J and Golson, Jacob and Bjerke, Gabriel and Snyder, Isaac and Taylor, Gage and Wilson, Finnegan and Rabinowitz, Grace I and Kline, Dylan J and Grapes, Michael D and Sullivan, Kyle T and Belof, Jonathan L and Eliasson, Veronica},
title = {Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing},
journal = {HardwareX},
year = {2024},
volume = {17},
pages = {e00515},
doi = {10.1016/j.ohx.2024.e00515}
}
EUVIMED