EUVIMEDEUVIMED entdecken
Crossref

Build processes for functionally-graded materials via direct-ink write additive manufacturing

Gilbert T. Carranza, Christopher Curtis, William Stricklan, Raymond Rumpf, Christopher Stricklan

Progress in Additive Manufacturing · 2026-06 · 11 (6) · 5775-5786

DOI: 10.1007/s40964-026-01667-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 22.04.2026. Verfasst von Gilbert T. Carranza und 4 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: DEVCOM Army Research Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A method to design and fabricate non-vertical, volumetric functionally-graded materials was developed and tested for direct-ink write additive manufacturing. A method to define a gradient through a volume using a set of parametric equations was used. The gradient information was calculated and assigned to toolpaths generated by slicing software at the g-code level. A purge routine, a look-ahead routine, and a dynamic infill routine were all incorporated in the toolpath g-code generation. The g-code was tested on a modified Lulzbot Taz 6 fitted with an active mixing system and on a 3D Flexible multi-material mixing platform fitted with a static mixing system. Calibration and configuration techniques were performed on the platforms to determine proper printing parameters. Both platforms manufactured printed samples with varying gradations. The 3D Flexible system exhibited a 10% deviation in the deposited gradient profile of the samples. Attributes of the graded profiles and the behavior of subsequent mixing transitions are quantified and discussed.

Förderung

  • DEVCOM Army Research Laboratory

Zitieren

APA

Carranza, G. T., Curtis, C., Stricklan, W., Rumpf, R., & Stricklan, C. (2026). Build processes for functionally-graded materials via direct-ink write additive manufacturing. Progress in Additive Manufacturing, 11(6), 5775-5786. https://doi.org/10.1007/s40964-026-01667-y

Vancouver

Carranza GT, Curtis C, Stricklan W, Rumpf R, Stricklan C. Build processes for functionally-graded materials via direct-ink write additive manufacturing. Progress in Additive Manufacturing. 2026;11(6):5775-5786. doi:10.1007/s40964-026-01667-y

BibTeX
@article{Carranza2026,
  author = {Carranza, Gilbert T. and Curtis, Christopher and Stricklan, William and Rumpf, Raymond and Stricklan, Christopher},
  title = {Build processes for functionally-graded materials via direct-ink write additive manufacturing},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {6},
  pages = {5775--5786},
  doi = {10.1007/s40964-026-01667-y}
}
Kostenlos starten →