Effects of 3D-printers and manufacturer-specified post-curing units on the dimensional accuracy, compressive strength, and degree of conversion of resin for fixed dental prostheses
Journal of Dental Sciences · 2025-07 · 20 (3) · 1699-1708
DOI: 10.1016/j.jds.2025.03.024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Dental Sciences, 2025-07. Verfasst von Citra Dewi Sahrir und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Education.
Abstract (Originalsprache)
Background/purpose: The 3D printer and post-curing unit are important factors in producing the best 3D printed crowns. To explore the effects of different combinations of 3D-printers and manufacturer-specified post-curing units on the dimensional accuracy, compressive strength, and degree of conversion (DC%) of 3D-printable resin for fixed dental prostheses. Materials and methods: Specimens were designed in 2 sizes and additively-manufactured using 2 digital light processing (DLP) 3D-printers (NextDent 5100, ND and PrintinDLP+, PN). The 3D-printed samples were polymerized using 2 different post curing units (LC-3D Print box, N and PrintInCure+, P). Dimensional accuracy was evaluated under an optical microscope, while compressive strength was determined using a universal testing machine. Fourier transform infrared spectroscopy was used to analyze the resin molecular bond characteristics and DC%. Statistical analysis, including ANOVA and Tukey's HSD post-hoc tests (P < 0.05).
Results
Significant dimensional variations were observed for both square and rectangular samples (P < 0.001). The ND-P showed the greatest ductility and relatively high maximum stress. The fracture strengths were ND-N: 181.55 ± 8.37 MPa, ND-P: 151.54 ± 2.06 MPa, PN-N: 175.51 ± 12.44 MPa, and PN-P: 127.84 ± 10.10 MPa (P < 0.001). Surface inspection at 200 × magnification revealed subtler fault lines in ND-N and PN-P. FTIR analyses confirmed DC% was highest for ND-N (79.70 ± 1.02%) and PN-N (78.12 ± 0.94%), intermediate for ND-P (73.24 ± 0.89%) and PN-P (71.06 ± 1.67%).
Conclusion
Post-curing units had a greater impact on dimensional accuracy, strength, and polymerization than the choice of 3D-printer. Optimal resin properties require careful optimization of post-curing parameters and equipment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan.
- Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, IN, USA.
- Department of Mechanical Engineering, National Taipei University of Technology, Taipei, Taiwan.
- Division of Periodontics, Department of Dentistry, Taipei Medical University Hospital, Taipei, Taiwan.
- School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan.
- Department of Dentistry, Wan-Fang Hospital, Taipei Medical University, Taipei, Taiwan.
Förderung
- Ministry of Education
Zitieren
APA
Sahrir, C. D., Lin, W. S., Wang, C. S., Lin, H. E., Wang, C. W., & Lin, W. C. (2025). Effects of 3D-printers and manufacturer-specified post-curing units on the dimensional accuracy, compressive strength, and degree of conversion of resin for fixed dental prostheses. Journal of Dental Sciences, 20(3), 1699-1708. https://doi.org/10.1016/j.jds.2025.03.024
Vancouver
Sahrir CD, Lin WS, Wang CS, Lin HE, Wang CW, Lin WC. Effects of 3D-printers and manufacturer-specified post-curing units on the dimensional accuracy, compressive strength, and degree of conversion of resin for fixed dental prostheses. Journal of Dental Sciences. 2025;20(3):1699-1708. doi:10.1016/j.jds.2025.03.024
BibTeX
@article{Sahrir2025,
author = {Sahrir, Citra Dewi and Lin, Wei-Shao and Wang, Ching-Shuen and Lin, Hwai-En and Wang, Chin-Wei and Lin, Wei-Chun},
title = {Effects of 3D-printers and manufacturer-specified post-curing units on the dimensional accuracy, compressive strength, and degree of conversion of resin for fixed dental prostheses},
journal = {Journal of Dental Sciences},
year = {2025},
volume = {20},
number = {3},
pages = {1699--1708},
doi = {10.1016/j.jds.2025.03.024}
}
EUVIMED