A novel nanoclay/MWCNTs nanocomposite-based enzymatic biosensor for electrochemical detection of uric acid
Biosensors and Bioelectronics · 2026
DOI: 10.1016/j.bios.2025.118289 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2026. Verfasst von Kinam Hyun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Alberta, T2N 1N4, Canada. Hauptthemen laut MEDLINE: Biosensing Techniques, Uric Acid, Nanotubes, Carbon, Nanocomposites. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Canada Foundation for Innovation, Ministry of Science and ICT, South Korea, Korea Institute of Geoscience and Mineral Resources.
Abstract (Originalsprache)
The growing demand for rapid, low-cost biomarker detection has accelerated development of point-of-care electrochemical biosensors, yet their broader adoption is still constrained by limited reproducibility, stability, and scalable fabrication, especially for nanomaterial-modified electrodes. Here, we introduce an electrochemical biosensor for uric acid detection based on a bentonite nanoclay (Bent) and multi-walled carbon nanotubes (MWCNTs) nanocomposite film deposited via a custom spray-coating method. The fabrication process was systematically characterized to evaluate the influence of Bent incorporation on film morphology, electrode surface properties, and electrochemical behavior. Experimental results confirmed that Bent improved homogeneity and film-forming behavior within the MWCNTs network, contributing to enhanced sensing performance. The resulting biosensor exhibited high sensitivity (13.91 mA mM-1 cm-2) with a linear range of 10-2000 μM and a limit of detection of 5.31 μM. Notably, the developed sensor maintained acceptable recovery (92.2-110.8 %) even in contrived samples. Overall, this study demonstrates a reproducible lab-scale fabrication approach and highlights the potential of Bent for enabling highly sensitive and stable biosensors, offering a promising route toward real-world point-of-care applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Alberta, T2N 1N4, Canada.
- Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Alberta, T2N 1N4, Canada.
- Advanced Geo-materials Research Department, Korea Institute of Geoscience and Mineral Resources, Pohang-si, Gyeongsangbuk-do, South Korea. Electronic address: jaehwankim@kigam.re.kr.
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Alberta, T2N 1N4, Canada; Department of Biomedical Engineering, Schulich School of Engineering, University o…
Förderung
- Canada Foundation for Innovation
- Ministry of Science and ICT, South Korea
- Korea Institute of Geoscience and Mineral Resources
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Hyun, K., Park, S., Williamson, P., Park, S. S., Kim, J., & Kim, K. (2026). A novel nanoclay/MWCNTs nanocomposite-based enzymatic biosensor for electrochemical detection of uric acid. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2025.118289
Vancouver
Hyun K, Park S, Williamson P, Park SS, Kim J, Kim K. A novel nanoclay/MWCNTs nanocomposite-based enzymatic biosensor for electrochemical detection of uric acid. Biosensors and Bioelectronics. 2026. doi:10.1016/j.bios.2025.118289
BibTeX
@article{Hyun2026,
author = {Hyun, Kinam and Park, Seohyun and Williamson, Paul and Park, Simon S and Kim, Jaehwan and Kim, Keekyoung},
title = {A novel nanoclay/MWCNTs nanocomposite-based enzymatic biosensor for electrochemical detection of uric acid},
journal = {Biosensors and Bioelectronics},
year = {2026},
doi = {10.1016/j.bios.2025.118289}
}
EUVIMED