High‐Strength and Ductile TiNbZrTa BCC MPEA With Heterogeneous Microstructure for Orthopedic Implants
Advanced Healthcare Materials · 2026
DOI: 10.1002/adhm.202505213 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, 2026. Verfasst von Shikun Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, State Key Laboratory of Cemented Carbide, Hunan University, Changsha, China. Hauptthemen laut MEDLINE: Alloys, Prostheses and Implants, Biocompatible Materials. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Key Program of Natural Science Foundation of Hunan Province.
Abstract (Originalsprache)
In order to develop a promising bio‐applicable body‐centered‐cubic multi‐principal element alloy (BCC MPEA) with excellent mechanical and biological properties, Tantalum (Ta) was introduced into TiNbZr alloy based on lattice distortion design, and heterogeneous structure was subsequently constructed. The widespread hetero‐structured interfaces alter planar slip mode in recrystallized grains (RGs) via emission and multiplication of geometrically necessary dislocations (GNDs), which generate significant heterogeneous deformation induced (HDI) stress effect. Plentiful subgrains and nano‐sized dislocation cells in unrecrystallized grains (UGs, i.e., textures) enable extensive dislocation behavior including annihilation, activation and interaction, effectively alleviating stress concentration in RGs and strain gradient across the interfaces. This process results in an optimal balance of yield strength reaching 925.2 MPa and fracture elongation of 26.1%. In vitro experiments demonstrate that TiNbZr 0.7 Ta 0.3 alloy exhibits enhanced cell adhesion, proliferation and osteogenic response compared to TC4 alloy. The remarkable mechanical properties and biocompatibility render it a highly promising candidate for orthopedic implants. This study provides new insights for the design and optimization of biomedical MPEAs with excellent mechanical properties.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Materials Science and Engineering, State Key Laboratory of Cemented Carbide, Hunan University, Changsha, China.
- Centre For Translational Medicine Research & Development, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, China.
- School of Dentistry, University of California, Los Angeles, California, USA.
ORCID-Profile: Weidong Zhang, Yuanchi Zhang, Zhenggang Wu
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Key Program of Natural Science Foundation of Hunan Province
- Guangdong Basic and Applied Basic Research Foundation
- National Key Research and Development Program of China
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Zhang, S., Xu, Z., Zhang, W., Xu, C., Li, Y., Zhang, Y., Xu, J., Peng, F., Shen, L., & Wu, Z. (2026). High‐Strength and Ductile TiNbZrTa BCC MPEA With Heterogeneous Microstructure for Orthopedic Implants. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.202505213
Vancouver
Zhang S, Xu Z, Zhang W, Xu C, Li Y, Zhang Y, et al. High‐Strength and Ductile TiNbZrTa BCC MPEA With Heterogeneous Microstructure for Orthopedic Implants. Advanced Healthcare Materials. 2026. doi:10.1002/adhm.202505213
BibTeX
@article{Zhang2026,
author = {Zhang, Shikun and Xu, Zili and Zhang, Weidong and Xu, Changlu and Li, Yongkang and Zhang, Yuanchi and Xu, Jingru and Peng, Fei and Shen, Ling and Wu, Zhenggang},
title = {High‐Strength and Ductile TiNbZrTa BCC MPEA With Heterogeneous Microstructure for Orthopedic Implants},
journal = {Advanced Healthcare Materials},
year = {2026},
doi = {10.1002/adhm.202505213}
}
EUVIMED