EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study

Max Beddoe, Thorsten Gölz, Martin Barkey, Enrico Bau, Matthias Godejohann, Stefan A Maier, Fritz Keilmann, Marioara Moldovan, Doina Prodan, Nicoleta Ilie, Andreas Tittl

Acta Biomaterialia · 2023-09 · 168 · 309-322

DOI: 10.1016/j.actbio.2023.07.017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Biomaterialia, 2023-09. Verfasst von Max Beddoe und 10 weiteren Autor:innen. Beteiligte Einrichtung: Chair in Hybrid Nanosystems, Nano-Institute Munich, Faculty of Physics, Ludwig Maximilians-University Munich, Munich 80539, Germany; Institute of App…. Hauptthemen laut MEDLINE: Quality of Life, Microscopy. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Centre for Nano and Soft Matter Sciences, European Research Council, Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The preservation of oral health over a person's lifespan is a key factor for a high quality of life. Sustaining oral health requires high-end dental materials with a plethora of attributes such as durability, non-toxicity and ease of application. The combination of different requirements leads to increasing miniaturization and complexity of the material components such as the composite and adhesives, which makes the precise characterization of the material blend challenging. Here, we demonstrate how modern IR spectroscopy and imaging from the micro- to the nanoscale can provide insights on the chemical composition of the different material sections of a dental filling. We show how the recorded IR-images can be used for a fast and non-destructive porosity determination of the studied adhesive. Furthermore, the nanoscale study allows precise assessment of glass cluster structures and distribution within their characteristic organically modified ceramic (ORMOCER) matrix and an assessment of the interface between the composite and adhesive material. For the study we used a Fourier-Transform-IR (FTIR) microscope and a quantum cascade laser-based IR-microscope (QCL-IR) for the microscale analysis and a scattering-type scanning near-field optical microscopy (s-SNOM) for the nanoscale analysis. The paper ends with an in-depth discussion of the strengths and weaknesses of the different imaging methods to give the reader a clear picture for which scientific question the microscopes are best suited for. STATEMENT OF SIGNIFICANCE: Modern resin-based composites for dental restoration are complex multi-compound materials. In order to improve these high-end materials, it is important to investigate the molecular composition and morphology of the different parts. An emergent method to characterize these materials is infrared spectroscopic imaging, which combines the strength of infrared spectroscopy and an imaging approach known from optical microscopy. In this work, three state of the art methods are compared for investigating a dental filling including FTIR- and quantum cascade laser IR-imaging microscopy for the microscale and scattering-type scanning near-field optical microscopy for the nanoscale.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Quality of LifeMicroscopyHumansSpectroscopy, Fourier Transform InfraredSpectrophotometry, InfraredDental MaterialsMaterials TestingComposite Resins

Stichwörter der Autor:innen

AdhesivesDental resin compositesFTIRInfrared spectroscopyNear-field microscopyQCL-IR

Substanzen

Dental MaterialsComposite Resins

Autor:innen und Institutionen

  • Chair in Hybrid Nanosystems, Nano-Institute Munich, Faculty of Physics, Ludwig Maximilians-University Munich, Munich 80539, Germany; Institute of Applied Physics, Abbe Center of Photonics, Friedrich Schiller University…
  • Chair in Hybrid Nanosystems, Nano-Institute Munich, Faculty of Physics, Ludwig Maximilians-University Munich, Munich 80539, Germany.
  • MG Optical Solutions GmbH, Utting am Ammersee 86919, Germany.
  • Chair in Hybrid Nanosystems, Nano-Institute Munich, Faculty of Physics, Ludwig Maximilians-University Munich, Munich 80539, Germany; School of Physics and Astronomy, Monash University, Clayton, Victoria 3800, Australia;…
  • Babes-Bolyai University, Institute of Chemistry Raluca Ripan, Cluj-Napoca, Romania.
  • Department of Conservative Dentistry and Periodontology, University Hospital, LMU Munich, Germany. Electronic address: nilie@dent.med.uni-muenchen.de.

Förderung

  • Centre for Nano and Soft Matter Sciences
  • European Research Council
  • Engineering and Physical Sciences Research Council
  • European Commission
  • Australian Research Council
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Beddoe, M., Gölz, T., Barkey, M., Bau, E., Godejohann, M., Maier, S. A., Keilmann, F., Moldovan, M., Prodan, D., Ilie, N., & Tittl, A. (2023). Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study. Acta Biomaterialia, 168, 309-322. https://doi.org/10.1016/j.actbio.2023.07.017

Vancouver

Beddoe M, Gölz T, Barkey M, Bau E, Godejohann M, Maier SA, et al. Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study. Acta Biomaterialia. 2023;168:309-322. doi:10.1016/j.actbio.2023.07.017

BibTeX
@article{Beddoe2023,
  author = {Beddoe, Max and Gölz, Thorsten and Barkey, Martin and Bau, Enrico and Godejohann, Matthias and Maier, Stefan A and Keilmann, Fritz and Moldovan, Marioara and Prodan, Doina and Ilie, Nicoleta and Tittl, Andreas},
  title = {Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study},
  journal = {Acta Biomaterialia},
  year = {2023},
  volume = {168},
  pages = {309--322},
  doi = {10.1016/j.actbio.2023.07.017}
}
Kostenlos starten →