EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface alterations and compound release from aligner attachments in vitro

Anna Iliadi, Sevasti-Kiriaki Zervou, Despina Koletsi iD, Marc Schätzle, Anastasia Hiskia, Theodore Eliades iD, George Eliades

European Journal of Orthodontics · 01.08.2024 · 46 (4)

DOI: 10.1093/ejo/cjae026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Orthodontics, online erschienen am 17.06.2024. Verfasst von Anna Iliadi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, Greece. Hauptthemen laut MEDLINE: Surface Properties, Zirconium, Composite Resins, Materials Testing. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

The aim of the present study was to assess the alterations in morphology, roughness, and composition of the surfaces of a conventional and a flowable composite attachment engaged with aligners, and to evaluate the release of resin monomers and their derivatives in an aqueous environment.

Methods

Zirconia tooth-arch frames (n = 20) and corresponding thermoformed PET-G aligners with bonded attachments comprising two composite materials (universal—C and flowable—F) were fabricated. The morphological features (stereomicroscopy), roughness (optical profilometry), and surface composition (ATR-FTIR) of the attachments were examined before and after immersion in water. To simulate intraoral use, the aligners were removed and re-seated to the frames four times per day for a 7-day immersion period. After testing, the eluents were analyzed by LC-MS/MS targeting the compounds Bis-GMA, UDMA, 2-HEMA, TEGDMA and BPA and by LC-HRMS for suspect screening of the leached dental material compounds and their degradation products.

Results

After testing, abrasion-induced defects were found on attachment surfaces such as scratches, marginal cracks, loss of surface texturing, and fractures. The morphological changes and debonding rate were greater in F. Comparisons (before-after testing) revealed a significantly lower Sc roughness parameter in F. The surface composition of the aligners after testing showed minor changes from the control, with insignificant differences in the degree of C = C conversion, except for few cases with strong evidence of hydrolytic degradation. Targeted analysis results revealed a significant difference in the compounds released between Days 1 and 7 in both materials. Insignificant differences were found when C was compared with F in both timeframes. Several degradation products were detected on Day 7, with a strong reduction in the concentration of the targeted compounds.

Conclusions

The use of aligners affects the surface characteristics and degradation rate of composite attachments in an aqueous environment, releasing monomers, and monomer hydrolysates within 1-week simulated use.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Surface PropertiesZirconiumComposite ResinsMaterials TestingMethacrylatesPolyethylene GlycolsPolymethacrylic AcidsPolyurethanesBisphenol A-Glycidyl MethacrylateDental MaterialsIn Vitro TechniquesHumansTooth Movement TechniquesSpectroscopy, Fourier Transform Infrared

Substanzen

ZirconiumComposite Resinszirconium oxideMethacrylatestriethylene glycol dimethacrylatePolyethylene GlycolsPolymethacrylic AcidsPolyurethanesBisphenol A-Glycidyl MethacrylateDental Materials

Autor:innen und Institutionen

  • Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, Greece.
  • Faculty of Medicine and Health Technology, University of Tampere, Finland.
  • Photo-Catalytic Processes and Environmental Chemistry, Institute of Nanoscience and Nanotechnology, National Centre for Scientific Research 'Demokritos', Athens, Greece.
  • Clinic of Orthodontics and Pediatric Dentistry, Center for Dental Medicine, University of Zurich, Switzerland.
  • Meta-Research Innovation Center at Stanford (METRICS), Stanford University, CA, USA.

ORCID-Profile: Despina Koletsi, Theodore Eliades

Zitieren

APA

Iliadi, A., Zervou, S. K., Koletsi, D., Schätzle, M., Hiskia, A., Eliades, T., & Eliades, G. (2024). Surface alterations and compound release from aligner attachments in vitro. European Journal of Orthodontics, 46(4). https://doi.org/10.1093/ejo/cjae026

Vancouver

Iliadi A, Zervou SK, Koletsi D, Schätzle M, Hiskia A, Eliades T, et al. Surface alterations and compound release from aligner attachments in vitro. European Journal of Orthodontics. 2024;46(4). doi:10.1093/ejo/cjae026

BibTeX
@article{Iliadi2024,
  author = {Iliadi, Anna and Zervou, Sevasti-Kiriaki and Koletsi, Despina and Schätzle, Marc and Hiskia, Anastasia and Eliades, Theodore and Eliades, George},
  title = {Surface alterations and compound release from aligner attachments in vitro},
  journal = {European Journal of Orthodontics},
  year = {2024},
  volume = {46},
  number = {4},
  doi = {10.1093/ejo/cjae026}
}
Kostenlos starten →