EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic surface engineering of PBF-EB/M Ti–6Al–2Sn–4Zr–2Mo: linking support-fingerprint morphology to high-temperature tribological behavior

Farideh Davoodi, Parisa Moazzen, Mohammad Taghian, Manuela Galati, Mohsen Mohammadi, Abdollah Saboori

Progress in Additive Manufacturing · 2026-06 · 11 (6) · 5935-5954

DOI: 10.1007/s40964-026-01677-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 14.04.2026. Verfasst von Farideh Davoodi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Torino.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of two industrialized post-surface treatments, grinding, and grinding-tumble finishing, on the tribological behaviour of Ti–6Al–2Sn–4Zr–2Mo (Ti6242) samples produced via Powder Bed Fusion-Electron Beam/Metal (PBF-EB/M), focusing on surfaces that retain the characteristic fingerprint of support structures. By employing a combination of grinding and tumble finishing, this research aimed to mitigate the negative effects of surface irregularities, enhance wear resistance, reduce friction, and, consequently, make these components suitable for demanding applications such as aerospace engine and turbine components, where high temperatures and frictional stresses are critical. Friction tests were conducted from room temperature to 450 °C, complemented by nanoindentation, surface roughness, and microhardness analyses. The combination of grinding and tumble finishing resulted in a ~ 10% increase in hardness and improved the hardness-to-elastic modulus ratio compared to grinding alone. Interestingly, although the hybrid-treated surfaces exhibited slightly higher surface roughness (Ra) than the ground samples, they demonstrated superior tribological performance at room temperature. This hybrid treatment also reduced the friction coefficient at 450 °C, which may be attributed to the formation of titanium oxide, which enhances lubrication. The study demonstrated the effectiveness of the combined treatments in mitigating the negative impact of support structure features on the tribological performance of the final components.

Förderung

  • Politecnico di Torino

Zitieren

APA

Davoodi, F., Moazzen, P., Taghian, M., Galati, M., Mohammadi, M., & Saboori, A. (2026). Synergistic surface engineering of PBF-EB/M Ti–6Al–2Sn–4Zr–2Mo: linking support-fingerprint morphology to high-temperature tribological behavior. Progress in Additive Manufacturing, 11(6), 5935-5954. https://doi.org/10.1007/s40964-026-01677-w

Vancouver

Davoodi F, Moazzen P, Taghian M, Galati M, Mohammadi M, Saboori A. Synergistic surface engineering of PBF-EB/M Ti–6Al–2Sn–4Zr–2Mo: linking support-fingerprint morphology to high-temperature tribological behavior. Progress in Additive Manufacturing. 2026;11(6):5935-5954. doi:10.1007/s40964-026-01677-w

BibTeX
@article{Davoodi2026,
  author = {Davoodi, Farideh and Moazzen, Parisa and Taghian, Mohammad and Galati, Manuela and Mohammadi, Mohsen and Saboori, Abdollah},
  title = {Synergistic surface engineering of PBF-EB/M Ti–6Al–2Sn–4Zr–2Mo: linking support-fingerprint morphology to high-temperature tribological behavior},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {6},
  pages = {5935--5954},
  doi = {10.1007/s40964-026-01677-w}
}
Kostenlos starten →