EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy

A. Perumal, T. Grace Shalini, R. Prithivirajan, S. Rathnamala, S. Gejendhiran

Frontiers in Mechanical Engineering · 17.11.2026 · 12

DOI: 10.3389/fmech.2026.2007646 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Mechanical Engineering, online erschienen am 17.11.2026. Verfasst von A. Perumal und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Abrasive water jet machining (AWJM) of titanium alloys presents significant modelling challenges because the process responses depend on several interacting parameters in ways that simple regression cannot capture reliably. This paper builds a machine learning framework around XGBoost regression combined with SHapley Additive exPlanations (SHAP) to predict material removal rate (MRR), surface roughness (Ra), and kerf width in AWJM of Ti-6Al-2Sn-4Zr-2Mo alloy. An L18 Taguchi orthogonal array was used to generate 18 experimental runs across four parameters water pressure, abrasive flow rate (AFR), traverse speed (TS), and stand-off distance (SOD). Bayesian hyperparameter tuning gave the XGBoost model a cross-validated R 2 of 0.744 and 0.539 for MRR and Ra, respectively, outperforming the baseline models of linear regression and random forest. SHAP analysis revealed that the effects of water pressure and AFR are the most significant for MRR, while the effect of TS is dominant for Ra. All three responses were then plotted in a Pareto space where the trade-offs between the three responses were mapped and the non-dominated combinations of parameters were identified. The results demonstrate that interpretable ensemble learning is a viable approach for improving the parameter selection of advanced titanium alloy machining.

Zitieren

APA

Perumal, A., Shalini, T. G., Prithivirajan, R., Rathnamala, S., & Gejendhiran, S. (2026). Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy. Frontiers in Mechanical Engineering, 12. https://doi.org/10.3389/fmech.2026.2007646

Vancouver

Perumal A, Shalini TG, Prithivirajan R, Rathnamala S, Gejendhiran S. Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy. Frontiers in Mechanical Engineering. 2026;12. doi:10.3389/fmech.2026.2007646

BibTeX
@article{Perumal2026,
  author = {Perumal, A. and Shalini, T. Grace and Prithivirajan, R. and Rathnamala, S. and Gejendhiran, S.},
  title = {Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy},
  journal = {Frontiers in Mechanical Engineering},
  year = {2026},
  volume = {12},
  doi = {10.3389/fmech.2026.2007646}
}
Kostenlos starten →