EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural anisotropy and near-isotropic tribological behavior of electron beam powder bed fusion Ti–6Al–2Sn–4Zr–2Mo alloy

Farideh Davoodi, Mohammad Taghian, Parisa Moazzen, Manuela Galati, Mohsen Mohammadi, Abdollah Saboori

Progress in Additive Manufacturing · 2026-08 · 11 (8) · 7075-7097

DOI: 10.1007/s40964-026-01717-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 13.05.2026. Verfasst von Farideh Davoodi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Torino.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti–6Al–2Sn–4Zr–2Mo (Ti6242) is a near-α titanium alloy developed for high-temperature applications, yet its tribological behavior in additively manufactured conditions remains insufficiently understood. This study aimed to investigate the influence of build orientation on the microstructure and tribological performance of Ti6242 components produced via electron beam powder bed fusion (EB-PBF) across temperatures from room temperature to 450 °C. The outcomes revealed that a higher fraction of equiaxed grains was observed in the horizontally oriented samples compared to the vertically oriented ones, reflecting the influence of build orientation on the microstructural anisotropy. Abrasive wear emerged as the predominant mechanism in EB-PBF-Ti6242 and Al 2 O 3 ball interactions under all tested conditions. The tribological behavior at 450 °C exhibited characteristics comparable to those at room temperature, with a friction coefficient of approximately 0.5 and a wear volume about 10% lower than that measured at room temperature, may be attributed to the formation of a TiO 2 tribolayer. Although the horizontal sample possessed smaller porosities and slightly higher hardness than the vertical one, no significant wear anisotropy was observed under a 5 N load, due to the combined effects of microstructure, surface topography and local stress response. The similarity in tribological performance of Ti6242 alloy at different temperatures, regardless of build direction, underscores its uniform wear resistance across a wide range of operating conditions.

Förderung

  • Politecnico di Torino

Zitieren

APA

Davoodi, F., Taghian, M., Moazzen, P., Galati, M., Mohammadi, M., & Saboori, A. (2026). Microstructural anisotropy and near-isotropic tribological behavior of electron beam powder bed fusion Ti–6Al–2Sn–4Zr–2Mo alloy. Progress in Additive Manufacturing, 11(8), 7075-7097. https://doi.org/10.1007/s40964-026-01717-5

Vancouver

Davoodi F, Taghian M, Moazzen P, Galati M, Mohammadi M, Saboori A. Microstructural anisotropy and near-isotropic tribological behavior of electron beam powder bed fusion Ti–6Al–2Sn–4Zr–2Mo alloy. Progress in Additive Manufacturing. 2026;11(8):7075-7097. doi:10.1007/s40964-026-01717-5

BibTeX
@article{Davoodi2026,
  author = {Davoodi, Farideh and Taghian, Mohammad and Moazzen, Parisa and Galati, Manuela and Mohammadi, Mohsen and Saboori, Abdollah},
  title = {Microstructural anisotropy and near-isotropic tribological behavior of electron beam powder bed fusion Ti–6Al–2Sn–4Zr–2Mo alloy},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {7075--7097},
  doi = {10.1007/s40964-026-01717-5}
}
Kostenlos starten →