EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser 3D-printed Periodic Porous Structures for Heat Exchangers: A Novel Characterization Approach Under Fully Developed Conditions

Samuele Piandoro, Filippo Azzini, Michele Francioso, Dexiang Zha, Erica Liverani, Beatrice Pulvirenti, Alessandro Fortunato

Lasers in Manufacturing and Materials Processing · 2026-06 · 13 (2) · 555-581

DOI: 10.1007/s40516-026-00347-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lasers in Manufacturing and Materials Processing, online erschienen am 19.05.2026. Verfasst von Samuele Piandoro und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Alma Mater Studiorum - Università di Bologna.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triply Periodic Minimal Surfaces (TPMS) have garnered significant attention in recent years because of their potential for enhancing heat transfer performance. Recent advances in additive manufacturing have made it possible to fabricate these complex geometries; however, accurately characterizing their thermal-hydraulic performance remains challenging. To address this, this paper proposes a novel approach leveraging periodic boundary conditions to simulate fully developed flow and heat transfer within TPMS, eliminating inlet/outlet effects to focus on the structure’s core region. The methodology was validated against experimental literature, showing excellent agreement in Nusselt number predictions. A case study on gyroid-based heat exchangers investigated the impact of edge dimension and wall thickness on performance. Key findings reveal that the Performance Evaluation Criterion (PEC) increases with porosity, with all designs exceeding the efficiency of traditional smooth ducts (PEC > 1). Specifically, gyroids with 45–50% porosity were identified as optimal, achieving a maximum PEC of 6.5 while strictly satisfying Laser Powder Bed Fusion (LPBF) printability constraints (minimum channel diameter $$> \varvec{1.2}$$ mm). Furthermore, a simplified correlation between the Nusselt and Forchheimer numbers is proposed to streamline future design optimizations. By providing a rigorous framework for characterization, this work enables the development of highly efficient and innovative thermal management solutions.

Förderung

  • Alma Mater Studiorum - Università di Bologna

Zitieren

APA

Piandoro, S., Azzini, F., Francioso, M., Zha, D., Liverani, E., Pulvirenti, B., & Fortunato, A. (2026). Laser 3D-printed Periodic Porous Structures for Heat Exchangers: A Novel Characterization Approach Under Fully Developed Conditions. Lasers in Manufacturing and Materials Processing, 13(2), 555-581. https://doi.org/10.1007/s40516-026-00347-7

Vancouver

Piandoro S, Azzini F, Francioso M, Zha D, Liverani E, Pulvirenti B, et al. Laser 3D-printed Periodic Porous Structures for Heat Exchangers: A Novel Characterization Approach Under Fully Developed Conditions. Lasers in Manufacturing and Materials Processing. 2026;13(2):555-581. doi:10.1007/s40516-026-00347-7

BibTeX
@article{Piandoro2026,
  author = {Piandoro, Samuele and Azzini, Filippo and Francioso, Michele and Zha, Dexiang and Liverani, Erica and Pulvirenti, Beatrice and Fortunato, Alessandro},
  title = {Laser 3D-printed Periodic Porous Structures for Heat Exchangers: A Novel Characterization Approach Under Fully Developed Conditions},
  journal = {Lasers in Manufacturing and Materials Processing},
  year = {2026},
  volume = {13},
  number = {2},
  pages = {555--581},
  doi = {10.1007/s40516-026-00347-7}
}
Kostenlos starten →