Fire Growth Behavior and Predictive Modeling of 3D-Printed Triply Periodic Minimal Surface (TPMS) Porous PLA Structures
Polymers · 22.07.2026 · 18 (14) · 1788
DOI: 10.3390/polym18141788 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 22.07.2026. Verfasst von Mingyang Guo und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation, Haikou 570228, China. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Fund of the State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation, Shaanxi Provincial Natural Science Foundation, State Key Laboratory of Safety and Resilience of Civil Engineering in Mountain Areas.
Abstract (Originalsprache)
Triply periodic minimal surfaces (TPMSs) are increasingly used in thermal management systems due to their high surface area and interconnected porous architecture. However, how TPMS geometry influences fire growth remains poorly understood. Herein, Gyroid, Diamond, and Schwarz-P PLA structures were fabricated through additive manufacturing, and their fire behavior was characterized via cone calorimetry. Univariate experiments demonstrate that flame propagation is primarily governed by cell structure, rather than porosity or specific surface area. The orthogonal array L9(33), covering three factors of wall thickness, cell size and cell type (Gyroid, Diamond, and Schwarz-P), indicates that their effects on the flame growth index (FGI) rank as: cell size > unit cell > thickness. Meanwhile, a multivariate regression model was developed to predict the FGI of TPMS porous PLA, exhibiting high prediction accuracy (R2 = 0.95) and low residual standard deviation. These results provide quantitative insights into the correlation between TPMS geometric features and fire growth, which facilitates the design of safer porous structures for thermal management applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation, Haikou 570228, China.
- School of Resources Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, China.
- National & Local Joint Engineering Research Center of Technical Fiber Composites for Safety and Health, School of Textile and Clothing, Nantong University, Nantong 226019, China.
- State Key Laboratory of Safety and Resilience of Civil Engineering in Mountain Area, Nanchang 330013, China.
- LMOPS, CentraleSupélec, Université de Lorraine, 57000 Metz, France.
ORCID-Profile: Yachao Wang, Henri Vahabi
Förderung
- Open Fund of the State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation
- Shaanxi Provincial Natural Science Foundation
- State Key Laboratory of Safety and Resilience of Civil Engineering in Mountain Areas
Zitieren
APA
Guo, M., Wang, Y., Lu, D., & Vahabi, H. (2026). Fire Growth Behavior and Predictive Modeling of 3D-Printed Triply Periodic Minimal Surface (TPMS) Porous PLA Structures. Polymers, 18(14), 1788. https://doi.org/10.3390/polym18141788
Vancouver
Guo M, Wang Y, Lu D, Vahabi H. Fire Growth Behavior and Predictive Modeling of 3D-Printed Triply Periodic Minimal Surface (TPMS) Porous PLA Structures. Polymers. 2026;18(14):1788. doi:10.3390/polym18141788
BibTeX
@article{Guo2026,
author = {Guo, Mingyang and Wang, Yachao and Lu, Dongzhao and Vahabi, Henri},
title = {Fire Growth Behavior and Predictive Modeling of 3D-Printed Triply Periodic Minimal Surface (TPMS) Porous PLA Structures},
journal = {Polymers},
year = {2026},
volume = {18},
number = {14},
pages = {1788},
doi = {10.3390/polym18141788}
}
EUVIMED