EUVIMEDEUVIMED entdecken
Crossref

Porous-Architectured Composite for Fully 3D-Printed Biodegradable Soft Electronics

Joo-Hyeon Park, Ju-Yong Lee, Se-Hun Kang, Minseong Chae, Minjung Chae, Jeongwoo Ham, Jae-Young Bae, Yong-Wu Kim, Jong-Hyoung Kim, Myoung-Ryul Ok, Seung-Kyun Kang iD

ACS Applied Materials & Interfaces · 12.11.2026

DOI: 10.1021/acsami.6c18846 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Joo-Hyeon Park und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Seoul National University, Seoul08826, Republic of Korea. Die Arbeit nennt 79 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable electronics offer the promise of implantable devices that disappear after use, reducing the need for surgical removal and mitigating chronic inflammatory responses. Achieving both tissue-level mechanical softness and sufficient electrical conductivity is critical for bioelectronics. Composite materials provide a versatile platform to satisfy these electrical and mechanical requirements, while 3D printing allows precise and customizable fabrication of complex and multi-material structures. However, in fully biodegradable composites, limited material options restrict simultaneous optimization of mechanical and electrical properties. Here, we introduce engineered internal porosity into a biodegradable electronic composite to achieve softer mechanical properties while maintaining electrical performance. In metal-polymer composites, a porous matrix promotes filler aggregation, forming a percolating conductive network at a lower filler loading compared to non-porous counterparts, thereby reducing stiffness. Engineered porosity within the printed structure reduces its elastic modulus by orders of magnitude and accelerates degradation. We also demonstrate multi-material 3D printing of porosity-programmed electronic inks for printed circuit boards and sensors applications. This structural strategy can be extended to other biodegradable filler-binder systems, thereby expanding the material palette for next-generation transient electronics.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiodegradablebioelectronicsporous compositessoft electronics

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Seoul National University, Seoul08826, Republic of Korea.
  • Department of Bioengineering, Stanford University, Stanford, California94304, United States.
  • Biomedical Engineering Research Center, Asan Medical Center, Seoul05505, Republic of Korea.
  • Biomaterials Research Center, Biomedical Research Division, Korea Institute of Science and Technology (KIST), Seoul02792, Republic of Korea.
  • Research Institute of Advanced Materials (RIAM), Seoul National University, Seoul08826, Republic of Korea.
  • Department of Materials Science and Engineering, Pukyong National University, Busan48513, Republic of Korea.

ORCID-Profile: Seung-Kyun Kang

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Park, J. H., Lee, J. Y., Kang, S. H., Chae, M., Chae, M., Ham, J., Bae, J. Y., Kim, Y. W., Kim, J. H., Ok, M. R., & Kang, S. K. (2026). Porous-Architectured Composite for Fully 3D-Printed Biodegradable Soft Electronics. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18846

Vancouver

Park JH, Lee JY, Kang SH, Chae M, Chae M, Ham J, et al. Porous-Architectured Composite for Fully 3D-Printed Biodegradable Soft Electronics. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18846

BibTeX
@article{Park2026,
  author = {Park, Joo-Hyeon and Lee, Ju-Yong and Kang, Se-Hun and Chae, Minseong and Chae, Minjung and Ham, Jeongwoo and Bae, Jae-Young and Kim, Yong-Wu and Kim, Jong-Hyoung and Ok, Myoung-Ryul and Kang, Seung-Kyun},
  title = {Porous-Architectured Composite for Fully 3D-Printed Biodegradable Soft Electronics},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c18846}
}
Kostenlos starten →