EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool

Mohammad Malekan, Charlotte F. Ilvig, Ramin Aghababaei

International Journal of Precision Engineering and Manufacturing · 2024-10 · 25 (10) · 2059-2075

DOI: 10.1007/s12541-024-01074-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Precision Engineering and Manufacturing, online erschienen am 08.07.2024. Verfasst von Mohammad Malekan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovationsfonden, University of Southern Denmark.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-speed machining is a practical way to attain high productivity with lower costs. Under this condition, the tool geometry needs to be optimized to sustain high cutting forces and temperatures. The sharpness of the cutting edge and the coating thickness (CT) are two key parameters that affect the tool’s performance. While a sharp edge eases the cutting process, it causes a high stress concentration, which increases the wear rate and eventual edge fracture. In this study, we use a combination of finite element simulations and experimental testing to evaluate the effects of CT ( 1–3 μm), edge radius ( $$r_{\beta }$$ r β , 6–15 μm), and coefficient of friction ( $$\upmu = 0 - 0.2$$ μ = 0 - 0.2 ) on the stress distribution at the cutting edge. Our simulations showed that the larger the CT, the higher the stress magnitude inside the coating, but the lower the maximum stress depth percentile. Considering an industrial case of cutting steel workpieces using AlCrN-coated tungsten carbide tools under given cutting parameters, our simulations suggested an optimum CT of 3 μm. By manufacturing a series of milling tools with different CTs and edge radii, we validated the simulation results using a set of well-controlled milling experiments. Finally, the edge radius should be selected considering the size of rake/flank angle mainly to control stress distribution over the cutting edge.

Förderung

  • Innovationsfonden
  • University of Southern Denmark

Zitieren

APA

Malekan, M., Ilvig, C. F., & Aghababaei, R. (2024). Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing, 25(10), 2059-2075. https://doi.org/10.1007/s12541-024-01074-9

Vancouver

Malekan M, Ilvig CF, Aghababaei R. Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool. International Journal of Precision Engineering and Manufacturing. 2024;25(10):2059-2075. doi:10.1007/s12541-024-01074-9

BibTeX
@article{Malekan2024,
  author = {Malekan, Mohammad and Ilvig, Charlotte F. and Aghababaei, Ramin},
  title = {Effects of Edge Radius and Coating Thickness on the Cutting Performance of AlCrN-Coated Tool},
  journal = {International Journal of Precision Engineering and Manufacturing},
  year = {2024},
  volume = {25},
  number = {10},
  pages = {2059--2075},
  doi = {10.1007/s12541-024-01074-9}
}
Kostenlos starten →