EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating

Mingyi Chang, Weidong Zhang, Dongzhou Jia, Xiaoqiang Wu, Yongqiang Fu, Qi Gao

Lubricants · 12.05.2026 · 14 (5) · 199

DOI: 10.3390/lubricants14050199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 12.05.2026. Verfasst von Mingyi Chang und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Provincial Science and Technology Development Special Plan Project, Rare Earth Modified Composite Gradient Tool Coating Preparation and Performance Research Project of Liaoning University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium alloy is difficult to cut, with tools prone to adhesion and diffusion wear that reduces life and surface quality. Traditional coatings fail to meet precision machining demands. Based on TiAlN, Ce-doped coatings were prepared via magnetron sputtering at varying powers to investigate mechanical and tribological properties. The results show that with the increase in Ce doping amount, the hardness, elastic modulus, H/E, and H3/E2 ratios of the coating increase first and then decrease, and the friction coefficient decreases first and then increases. The performance is optimal at 50 W, the friction coefficient is 0.676, and the film-based adhesion is 113.8 N. Compared with the TiAlN coating, the hardness increased by 12%, the wear loss decreased by 24%, and the H/E and H3/E2 increased by 31% and 95%, respectively. The mechanism analysis shows that the appropriate amount of Ce doping can improve the toughness of the coating by grain refinement and solid solution strengthening and significantly inhibit adhesive wear and oxidative wear. Ce-modified tools were further prepared for titanium alloy turning experiments. Compared with uncoated and traditional TiAlN-coated tools, Ce doping can effectively reduce tool wear and improve the surface quality of the workpiece and has significant advantages under high-speed and large cutting depth conditions. This study systematically reveals the adaptive lubrication mechanism of Ce-doped TiAlN coating in the cutting process of titanium alloy and provides theoretical support and engineering guidance for the preparation of special tool coatings for difficult-to-machine materials.

Förderung

  • Liaoning Provincial Science and Technology Development Special Plan Project
  • Rare Earth Modified Composite Gradient Tool Coating Preparation and Performance Research Project of Liaoning University of Technology

Zitieren

APA

Chang, M., Zhang, W., Jia, D., Wu, X., Fu, Y., & Gao, Q. (2026). Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating. Lubricants, 14(5), 199. https://doi.org/10.3390/lubricants14050199

Vancouver

Chang M, Zhang W, Jia D, Wu X, Fu Y, Gao Q. Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating. Lubricants. 2026;14(5):199. doi:10.3390/lubricants14050199

BibTeX
@article{Chang2026,
  author = {Chang, Mingyi and Zhang, Weidong and Jia, Dongzhou and Wu, Xiaoqiang and Fu, Yongqiang and Gao, Qi},
  title = {Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {199},
  doi = {10.3390/lubricants14050199}
}
Kostenlos starten →