EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Towards Multi-Scale Friction Modelling for Bulk Sheet Metal Forming Applications

Aratz Barandiaran, Alaitz Zabala, David Abedul, Javad Hazrati, Lander Galdos

Materials Science Forum · 14.04.2026 · 1184 · 113-121

DOI: 10.4028/p-3jrlbf ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 14.04.2026. Verfasst von Aratz Barandiaran und 4 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cold forging and sheet‑metal bulk forming operations typically involve severe deformation, high contact pressures, and substantial surface enlargement. As highlighted in previous studies, friction behavior under these extreme conditions is governed by temperature, contact pressure, sliding velocity, and changes in the real contact area due to surface expansion. This work presents a newly developed linear sliding tribotester designed to characterize the friction response of metal sheets subjected to sheet‑metal bulk forming conditions. The testing procedure consists of two stages. In the first stage, the sample is compressed to intentionally modify and enlarge the initial contact surface, with the degree of surface expansion controlled by the specimen geometry. In the second stage, once the surface has been altered, frictional contact is generated between the sample and a sliding table, enabling the measurement of normal and tangential forces. These force measurements are subsequently used to determine the mean coefficient of friction. The results obtained constitute the first dataset toward the development of a multi‑scale friction model for sheet‑metal bulk gear forging. This model aims to incorporate the effects of extreme contact pressures, asperity flattening, and lubricant-related hydrostatic and hydrodynamic mechanisms.

Zitieren

APA

Barandiaran, A., Zabala, A., Abedul, D., Hazrati, J., & Galdos, L. (2026). Towards Multi-Scale Friction Modelling for Bulk Sheet Metal Forming Applications. Materials Science Forum, 1184, 113-121. https://doi.org/10.4028/p-3jrlbf

Vancouver

Barandiaran A, Zabala A, Abedul D, Hazrati J, Galdos L. Towards Multi-Scale Friction Modelling for Bulk Sheet Metal Forming Applications. Materials Science Forum. 2026;1184:113-121. doi:10.4028/p-3jrlbf

BibTeX
@article{Barandiaran2026,
  author = {Barandiaran, Aratz and Zabala, Alaitz and Abedul, David and Hazrati, Javad and Galdos, Lander},
  title = {Towards Multi-Scale Friction Modelling for Bulk Sheet Metal Forming Applications},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1184},
  pages = {113--121},
  doi = {10.4028/p-3jrlbf}
}
Kostenlos starten →