A Multiple Emergency Ventilator as backup solution for disaster situations: prototype development and functional assessment
Medical & Biological Engineering & Computing · 2025-11 · 63 (11) · 3285-3303
DOI: 10.1007/s11517-025-03395-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Medical & Biological Engineering & Computing, online erschienen am 16.06.2025. Verfasst von Aldo J Suria und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics, Informatics and Bioengineering, Politecnico di Milano, Milan, Italy. aldo.suriaroldan@meduniwien.ac.at. Hauptthemen laut MEDLINE: Ventilators, Mechanical, Respiration, Artificial, Disasters. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Milano, Medical University of Vienna.
Abstract (Originalsprache)
Shared ventilation is an interesting topic amongst researchers due to the possibility of healthcare saturation under disaster conditions provoked by viruses, war environments, diffusive respiratory system diseases, etc. However, general outcomes from this practice have shown several risks. The Multiple Emergency Ventilator overcomes these hazards by providing a temporary, pressure-controlled ventilatory support for up to ten patients simultaneously, whilst allowing for a modular and fast assembly during emergencies. This article presents the construction and the assessment of the prototype using patient simulators with different types of bio-mechanical characteristic configurations at ten hospitalization stations. Ventilation parameters at the most distal-to-source station were recorded. Under normal operation, a minute ventilation of 9.6 breaths × L × min −1 was obtained. Critical operation during different types of localized sudden pneumatic disconnections was also investigated. Amongst these, only the event of a disconnection of any simulator at its pneumatic connection to the main distribution pipeline highlighted a poor minute ventilation of 4 breaths × L × min −1 . Yet, the probability of such an event is minimal due to the use of safe mechanical constraints at the relevant pneumatic connections. In this first prototype assessment, the device has shown its capabilities to ventilate multiple patients with consistent pressure behaviours even whilst adverse conditions are imposed. Graphical Abstract
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electronics, Informatics and Bioengineering, Politecnico di Milano, Milan, Italy. aldo.suriaroldan@meduniwien.ac.at.
- Department of Cardiac and Thoracic Aortic Surgery, Medical University of Vienna, Vienna, Austria. aldo.suriaroldan@meduniwien.ac.at.
- Department of Electronics, Informatics and Bioengineering, Politecnico di Milano, Milan, Italy.
- Department of Mechanical Engineering, Politecnico di Milano, Milan, Italy.
- Department of Anaesthesia and Resuscitation, IRCCS Ca' Granda Ospedale Maggiore Policlinico, Milan, Italy.
Förderung
- Politecnico di Milano
- Medical University of Vienna
Zitieren
APA
Suria, A. J., Paroni, L. G., Seva, S., Viganò, R., Casella, F., Zanella, A., Baselli, G., & Fiore, G. B. (2025). A Multiple Emergency Ventilator as backup solution for disaster situations: prototype development and functional assessment. Medical & Biological Engineering & Computing, 63(11), 3285-3303. https://doi.org/10.1007/s11517-025-03395-x
Vancouver
Suria AJ, Paroni LG, Seva S, Viganò R, Casella F, Zanella A, et al. A Multiple Emergency Ventilator as backup solution for disaster situations: prototype development and functional assessment. Medical & Biological Engineering & Computing. 2025;63(11):3285-3303. doi:10.1007/s11517-025-03395-x
BibTeX
@article{Suria2025,
author = {Suria, Aldo J and Paroni, Luca G and Seva, Silvano and Viganò, Roberto and Casella, Francesco and Zanella, Alberto and Baselli, Giuseppe and Fiore, Gianfranco B},
title = {A Multiple Emergency Ventilator as backup solution for disaster situations: prototype development and functional assessment},
journal = {Medical & Biological Engineering & Computing},
year = {2025},
volume = {63},
number = {11},
pages = {3285--3303},
doi = {10.1007/s11517-025-03395-x}
}
EUVIMED