EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ceramic-to-metal bonding using rare-earth containing Sn–Bi solder

Tianshi Feng, Bhabana Pati, Ka Man Chung, Yu Pei, Renkun Chen iD

Journal of Materials Science: Materials in Electronics · 2024-02 · 35 (6)

DOI: 10.1007/s10854-024-12176-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials Science: Materials in Electronics, online erschienen am 21.02.2024. Verfasst von Tianshi Feng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, University of California San Diego, 9500 Gilman Drive, MC 0411, La Jolla, CA 92130-0411 USA. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Aeronautics and Space Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the increasing miniaturization and power of optoelectronic devices, direct bonding of optical substrates like semiconductors and ceramics to metal heat sinks using low melting-point solder has gained significant interest. In this study, we demonstrated the bonding of glass to copper using Sn-58 wt% Bi solder (SB solder) doped with a small amount of rare earth (RE) elements. The RE elements act as active agents that facilitate the bonding to glasses without glass metallization. By optimizing the bonding parameters, such as reflow temperature and time, and employing an inert gas atmosphere to prevent solder or RE oxidation, we successfully achieved the highest shear strength in glass-copper solder joints using SB-RE solder, without the need for ultrasonic-assisted soldering (UAS). These results demonstrate the potential of using RE-containing solder for bonding unmetallized glass and ceramics in optoelectronic devices with metals at low soldering temperatures (< 200 °C). Furthermore, analysis of the shear strength and failure morphology of solder joints revealed only small degradation, primarily originating from the bulk solder region rather than the solder-glass interface, after both thermal aging (100 h) and cycling tests (100 cycles). The establishment of low-melting point RE-containing solders opens the possibility of direct jointing ceramic optoelectronic substrates to metal heat sinks for more efficient heat dissipation. In the meantime, our work also suggests that further optimization studies are necessary to explore its performance under more extreme working conditions.

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, University of California San Diego, 9500 Gilman Drive, MC 0411, La Jolla, CA 92130-0411 USA.
  • Physical Sciences, Inc, 20 New England Business Center Drive, Andover, MA 01810 USA.
  • Program in Materials Science and Engineering, University of California San Diego, 9500 Gilman Drive, MC 0418, La Jolla, CA 92093-0418 USA.

ORCID-Profile: Renkun Chen

Förderung

  • National Aeronautics and Space Administration

Zitieren

APA

Feng, T., Pati, B., Chung, K. M., Pei, Y., & Chen, R. (2024). Ceramic-to-metal bonding using rare-earth containing Sn–Bi solder. Journal of Materials Science: Materials in Electronics, 35(6). https://doi.org/10.1007/s10854-024-12176-5

Vancouver

Feng T, Pati B, Chung KM, Pei Y, Chen R. Ceramic-to-metal bonding using rare-earth containing Sn–Bi solder. Journal of Materials Science: Materials in Electronics. 2024;35(6). doi:10.1007/s10854-024-12176-5

BibTeX
@article{Feng2024,
  author = {Feng, Tianshi and Pati, Bhabana and Chung, Ka Man and Pei, Yu and Chen, Renkun},
  title = {Ceramic-to-metal bonding using rare-earth containing Sn–Bi solder},
  journal = {Journal of Materials Science: Materials in Electronics},
  year = {2024},
  volume = {35},
  number = {6},
  doi = {10.1007/s10854-024-12176-5}
}
Kostenlos starten →