Microstructure and Properties of Bi-Sn, Bi-Sn-Sb, and Bi-Sn-Ag Solder Alloys for Electronic Applications
Metals · 18.08.2025 · 15 (8) · 915
DOI: 10.3390/met15080915 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 18.08.2025. Verfasst von Andrei-Alexandru Ilie und 10 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The Bi-Sn, Bi-Sn-Ag, and Bi-Sn-Sb solder alloy systems represent lead-free, environmentally friendly alternatives for reliable electronic assembly. These alloys comply with increasingly strict environmental and health regulations, while offering low melting points suitable for soldering temperature-sensitive components. Microstructural analysis revealed distinct phase segregation in all alloys, with Sb promoting coarse Sn2Sb3 intermetallic compounds and Ag inducing fine needle-like Ag3Sn precipitates. Eutectic refinement and compositional contrast were confirmed by SEM-BSE and EDS mapping. Vickers microhardness measurements revealed increased hardness in Sb- and Ag-modified Bi–Sn alloys, with Ag3Sn dispersion yielding the highest strengthening effect, indicating enhanced mechanical potential. This study also reports the thermal and electrical conductivities of Bi60Sn40, Bi60Sn35Ag5, and Bi60Sn35Sb5 alloys over the 25–140 °C range. Bi60Sn40 showed an increase in thermal conductivity across the full temperature range from 16.93 to 26.93 W/m·K, while Bi60Sn35Ag5 reached 18.28 W/m·K at 25 °C, and Bi60Sn35Sb5 exhibited 13.90 W/m·K. These findings underline the critical influence of alloying elements on microstructure, phase stability, and thermophysical behavior, supporting their application in low-temperature soldering technologies.
Zitieren
APA
Ilie, A., Niculescu, F., Iacob, G., Pencea, I., Miculescu, F., Bololoi, R., Drăguț, D., Matei, A., Ghiţă, M., Priceputu, A., & Ungureanu, C. (2025). Microstructure and Properties of Bi-Sn, Bi-Sn-Sb, and Bi-Sn-Ag Solder Alloys for Electronic Applications. Metals, 15(8), 915. https://doi.org/10.3390/met15080915
Vancouver
Ilie A, Niculescu F, Iacob G, Pencea I, Miculescu F, Bololoi R, et al. Microstructure and Properties of Bi-Sn, Bi-Sn-Sb, and Bi-Sn-Ag Solder Alloys for Electronic Applications. Metals. 2025;15(8):915. doi:10.3390/met15080915
BibTeX
@article{Ilie2025,
author = {Ilie, Andrei-Alexandru and Niculescu, Florentina and Iacob, Gheorghe and Pencea, Ion and Miculescu, Florin and Bololoi, Robert and Drăguț, Dumitru-Valentin and Matei, Alexandru-Cristian and Ghiţă, Mihai and Priceputu, Adrian and Ungureanu, Constantin},
title = {Microstructure and Properties of Bi-Sn, Bi-Sn-Sb, and Bi-Sn-Ag Solder Alloys for Electronic Applications},
journal = {Metals},
year = {2025},
volume = {15},
number = {8},
pages = {915},
doi = {10.3390/met15080915}
}
EUVIMED