Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit
Journal of Prosthodontic Research · 2023 · 67 (4) · 610-618
DOI: 10.2186/jpr.jpr_d_22_00190 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2023. Verfasst von Amr Mohamed und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan. Hauptthemen laut MEDLINE: Computer-Aided Design, Acrylic Resins, Denture Bases, Dental Bonding. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 50 Literaturangaben.
Abstract (Originalsprache)
Purpose
Herein, the bond strength (BS) of denture teeth to a denture base resin in a milled monolithic unit was investigated and compared with those of 3D printed teeth to a 3D printed denture base and prefabricated teeth to a heat-cured acrylic resin before and after thermocycling.
Methods
Sixty specimens of a denture tooth attached to a cylindrical denture base were fabricated following ISO Standard 19736. Three fabrication techniques-3D printing, conventional compression molding, and milling using monolithic technology-were employed to mill teeth and denture base parts as a single unit. The BS was investigated before and after thermocycling. Data were statistically analyzed using the Kruskal-Wallis test with Bonferroni correction (α = 0.05).
Results
Before thermocycling, the mean BS of the milled group was significantly higher than that of the conventional group (P = 0.002). The 3D printed group showed no statistically significant difference from the milled (P = 0.051) and conventional (P = 0.824) groups. After thermocycling, although the mean BS values of the milled (P = 0.00) and 3D printed (P = 0.01) groups were significantly higher than that of the conventional group, there was no significant difference between them (P = 0.226). Only the BS of the conventional group was significantly reduced by thermocycling (P = 0.00).
Conclusions
The milled monolithic fabrication technique, which eliminates the need for a bonding step, offered a promising combination of high-precision digital fabrication and a significantly high BS. The BS of the conventional group significantly decreased after thermocycling.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
- Course for Oral Health Engineering, Faculty of Dentistry, Tokyo Medical and Dental University, Tokyo, Japan.
Zitieren
APA
Mohamed, A., Takaichi, A., Kajima, Y., Takahashi, H., & Wakabayashi, N. (2023). Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit. Journal of Prosthodontic Research, 67(4), 610-618. https://doi.org/10.2186/jpr.jpr_d_22_00190
Vancouver
Mohamed A, Takaichi A, Kajima Y, Takahashi H, Wakabayashi N. Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit. Journal of Prosthodontic Research. 2023;67(4):610-618. doi:10.2186/jpr.jpr_d_22_00190
BibTeX
@article{Mohamed2023,
author = {Mohamed, Amr and Takaichi, Atsushi and Kajima, Yuka and Takahashi, Hidekazu and Wakabayashi, Noriyuki},
title = {Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit},
journal = {Journal of Prosthodontic Research},
year = {2023},
volume = {67},
number = {4},
pages = {610--618},
doi = {10.2186/jpr.jpr_d_22_00190}
}
EUVIMED