The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns—an in vitro study
Clinical Oral Investigations · 24.08.2023 · 27 (10) · 6125-6133
DOI: 10.1007/s00784-023-05229-2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 24.08.2023. Verfasst von Ashraf Refaie und 4 weiteren Autor:innen. Beteiligte Einrichtung: Oral Technology, Dental School, Medical Faculty, University Hospital of Bonn, Welschnonnenstr. 17, 53111, Bonn, North Rhine-Westphalia, Germany. ashr…. Hauptthemen laut MEDLINE: Zirconium, Crowns, Printing, Three-Dimensional, Computer-Aided Design. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitätsklinikum Bonn.
Abstract (Originalsprache)
Objectives
The aim of this study was to evaluate the effect of cyclic mechanical loading on the fracture resistance of 3D-printed zirconia crowns in comparison to milled zirconia crowns. Materials and methods Monolithic zirconia crowns ( n = 30) were manufactured using subtractive milling (group M) and 3D additive printing (group P). Nine samples of each group were fractured under one-time loading while the other 6 samples were subjected to cyclic loading for 1.2 million cycles before being subjected to one-time loading until fracture. Scanning electron microscope (SEM) fractographic analysis was carried out on fractured fragments of representative samples.
Results
The mean for fracture resistance of group M was 1890 N without cyclic loading and 1642 N after being subjected to cyclic loading, and they were significantly higher than that of group P (1658 N and 1224 N respectively).
Conclusions
The fabrication technique and cyclic loading affect the fracture resistance of zirconia crowns. Although the fracture resistance values for the 3D-printed crowns were lower than those of the milled, still they are higher than the masticatory forces and thus could be considered being clinically acceptable. Clinical relevance Concerning fracture resistance, 3D-printed crowns can withstand the masticatory forces for the long term without any cracks or failure.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Oral Technology, Dental School, Medical Faculty, University Hospital of Bonn, Welschnonnenstr. 17, 53111, Bonn, North Rhine-Westphalia, Germany. ashrafrefaie87@gmail.com.
- Department of Fixed Prosthodontics, Faculty of Dentistry, Fayoum University, Faiyum, Egypt. ashrafrefaie87@gmail.com.
- Oral Technology, Dental School, Medical Faculty, University Hospital of Bonn, Welschnonnenstr. 17, 53111, Bonn, North Rhine-Westphalia, Germany.
- Suez Canal University, Ismailia, Egypt.
- Department of Prosthodontics, Preclinical Education and Dental Materials Science, Dental School, Medical Faculty, University Hospital of Bonn, 53111, Bonn, North Rhine-Westphalia, Germany.
- Department of Orthodontic, Dental School, Medical Faculty, University Hospital of Bonn, 53111, Bonn, North Rhine-Westphalia, Germany.
ORCID-Profile: Ashraf Refaie, Christoph Bourauel, Ahmed Mahmoud Fouda, Lamia Singer
Förderung
- Universitätsklinikum Bonn
Zitieren
APA
Refaie, A., Bourauel, C., Fouda, A. M., Keilig, L., & Singer, L. (2023). The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns—an in vitro study. Clinical Oral Investigations, 27(10), 6125-6133. https://doi.org/10.1007/s00784-023-05229-2
Vancouver
Refaie A, Bourauel C, Fouda AM, Keilig L, Singer L. The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns—an in vitro study. Clinical Oral Investigations. 2023;27(10):6125-6133. doi:10.1007/s00784-023-05229-2
BibTeX
@article{Refaie2023,
author = {Refaie, Ashraf and Bourauel, Christoph and Fouda, Ahmed Mahmoud and Keilig, Ludger and Singer, Lamia},
title = {The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns—an in vitro study},
journal = {Clinical Oral Investigations},
year = {2023},
volume = {27},
number = {10},
pages = {6125--6133},
doi = {10.1007/s00784-023-05229-2}
}
EUVIMED