EUVIMEDEUVIMED entdecken
Crossref

Degree of conversion of 3D printing resins used for splints and orthodontic appliances under different postpolymerization conditions

Claire-Adeline Dantagnan, Philippe François, Stéphane Le Goff, Jean-Pierre Attal, Elisabeth Dursun

Clinical Oral Investigations · 09.02.2023 · 27 (6) · 2935-2942

DOI: 10.1007/s00784-023-04893-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 09.02.2023. Verfasst von Claire-Adeline Dantagnan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Innovative Dental Materials and Interfaces Research Unit (URB2i), UR 4462, 1 Rue Maurice Arnoux, 92120, Montrouge, France. Hauptthemen laut MEDLINE: Composite Resins, Splints. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 34 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

OBJECTIVES: To measure the degree of conversion (DC) of different 3D printing resins used for splints or orthodontic appliances under different postpolymerization conditions. MATERIALS AND METHODS: Five 3D-printed photopolymer resins were studied. Each resin was analyzed in liquid form (n = 15), and then cylindrical specimens (n = 135) were additively manufactured and postcured with Form Cure (Formlabs) at different times (10, 60, and 90 min) and temperatures (20 °C, 60 °C, and 80 °C). The DC of each specimen was measured with Fourier transform infrared spectroscopy (FTIR). The data were statistically analyzed using a 3-way ANOVA followed by Tukey's post hoc test. RESULTS: The time and temperature of postpolymerization significantly influenced the DC of each resin: when time and/or temperature increased, the DC increased. For all resins tested, the lowest DC was obtained with a postcuring protocol at 10 min and 20 °C, and the highest DC was obtained at 90 min and 80 °C. However, at 80 °C, the samples showed a yellowish color. CONCLUSIONS: With the Form Cure device, the time and temperature of postcuring could have an impact on the DC of the 3D printing resins studied. The DC of the 3D printing resins could be optimized by adjusting the postpolymerization protocol. CLINICAL RELEVANCE: Regardless of the resin used, when using the Form Cure device, postcuring at 60 min and 60 °C would be the minimal time and temperature conditions for achieving proper polymerization. Beyond that, it would be preferable to increase the postcuring time to boost the DC.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsSplintsTime FactorsOrthodontic AppliancesSpectroscopy, Fourier Transform InfraredPrinting, Three-DimensionalMaterials TestingPolymerization

Stichwörter der Autor:innen

Degree of conversion3D printing resin

Substanzen

Composite Resins

Autor:innen und Institutionen

  • Innovative Dental Materials and Interfaces Research Unit (URB2i), UR 4462, 1 Rue Maurice Arnoux, 92120, Montrouge, France.
  • Pitié Salpêtrière Hospital, 47-83 Boulevard de L'Hôpital, 75013, Paris, France.
  • Bretonneau Hospital, 23 Rue Joseph de Maistre, 75018, Paris, France.
  • Charles Foix Hospital, 7 Avenue de La République, 94200, Ivry-Sur-Seine, France.
  • Innovative Dental Materials and Interfaces Research Unit (URB2i), UR 4462, 1 Rue Maurice Arnoux, 92120, Montrouge, France. elisabeth.dursun@parisdescartes.fr.
  • Henri Mondor Hospital, 1 Rue Gustave Eiffel, 94000, Créteil, France. elisabeth.dursun@parisdescartes.fr.

Zitieren

APA

Dantagnan, C. A., François, P., Le Goff, S., Attal, J. P., & Dursun, E. (2023). Degree of conversion of 3D printing resins used for splints and orthodontic appliances under different postpolymerization conditions. Clinical Oral Investigations, 27(6), 2935-2942. https://doi.org/10.1007/s00784-023-04893-8

Vancouver

Dantagnan CA, François P, Le Goff S, Attal JP, Dursun E. Degree of conversion of 3D printing resins used for splints and orthodontic appliances under different postpolymerization conditions. Clinical Oral Investigations. 2023;27(6):2935-2942. doi:10.1007/s00784-023-04893-8

BibTeX
@article{Dantagnan2023,
  author = {Dantagnan, Claire-Adeline and François, Philippe and Le Goff, Stéphane and Attal, Jean-Pierre and Dursun, Elisabeth},
  title = {Degree of conversion of 3D printing resins used for splints and orthodontic appliances under different postpolymerization conditions},
  journal = {Clinical Oral Investigations},
  year = {2023},
  volume = {27},
  number = {6},
  pages = {2935--2942},
  doi = {10.1007/s00784-023-04893-8}
}
Kostenlos starten →