EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites

Ido Luiz de Azevedo Feiten iD, Bruno Borges de Oliveira iD, Karin de Mello Weig iD, Luise Gomes da Motta iD, Luis Felipe J Schneider iD, Larissa Maria Assad Cavalcante iD

European Journal of Oral Sciences · 2026

DOI: 10.1111/eos.70106 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Oral Sciences, 2026. Verfasst von Ido Luiz de Azevedo Feiten und 5 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Applied Biotechnology (LABA), School of Dentistry, Federal Fluminense University, Niteroi, Brazil. Hauptthemen laut MEDLINE: Composite Resins, Printing, Three-Dimensional, Dental Materials, Light-Curing of Dental Adhesives. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development, Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study determined the influence of post‐curing protocols on the color stability of provisional and long‐term 3D‐printable resin composites. Disc‐shaped specimens were fabricated from a provisional (Prov) and long‐term (Crown) 3D‐printable resin composites using a digital light processing printer. Post‐curing protocols included exposure to 405 nm‐based light sources (Anycubic for 30 or 60 min in the standard mode or Procure 1) and one 385 nm‐based light source (Procure 2 with distinct protocols). Color parameters ( L *, a *, b *) were measured at baseline, after 14 and 21 d of dry storage, and after 7 d of water immersion. Post‐curing protocol, material, and storage condition significantly influenced color stability. High‐irradiance protocols resulted in the highest color change values, exceeding the clinical acceptability threshold (Δ E 00 > 1.8). Water immersion induced a significant whitening effect and increased total color change in all groups. The long‐term resin demonstrated superior color stability compared to the provisional one across all post‐curing protocols. The choice of post‐curing protocol is critical for aesthetic performance, as high‐irradiance parameters, while potentially beneficial for mechanical properties, can compromise chromatic stability, particularly in materials with low filler content.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsPrinting, Three-DimensionalDental MaterialsLight-Curing of Dental AdhesivesColorMaterials TestingWaterImmersionTime FactorsHumansPolymerization

Stichwörter der Autor:innen

cosmetic dentistrydental materialsphotoinitiatorsprosthesis coloring

Substanzen

Composite ResinsDental MaterialsWater

Autor:innen und Institutionen

  • Laboratory for Applied Biotechnology (LABA), School of Dentistry, Federal Fluminense University, Niteroi, Brazil.
  • Astro Science, Uberaba, Brazil.

ORCID-Profile: Ido Luiz de Azevedo Feiten, Bruno Borges de Oliveira, Karin de Mello Weig, Luise Gomes da Motta, Luis Felipe J Schneider, Larissa Maria Assad Cavalcante

Förderung

  • National Council for Scientific and Technological Development
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Feiten, I. L. A., de Oliveira, B. B., de Mello Weig, K., da Motta, L. G., Schneider, L. F. J., & Cavalcante, L. M. A. (2026). The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70106

Vancouver

Feiten ILA, de Oliveira BB, de Mello Weig K, da Motta LG, Schneider LFJ, Cavalcante LMA. The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites. European Journal of Oral Sciences. 2026. doi:10.1111/eos.70106

BibTeX
@article{Feiten2026,
  author = {Feiten, Ido Luiz de Azevedo and de Oliveira, Bruno Borges and de Mello Weig, Karin and da Motta, Luise Gomes and Schneider, Luis Felipe J and Cavalcante, Larissa Maria Assad},
  title = {The influence of post‐curing protocols on the optical properties of provisional and long‐term 3D‐printable resin composites},
  journal = {European Journal of Oral Sciences},
  year = {2026},
  doi = {10.1111/eos.70106}
}
Kostenlos starten →