A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection
Microchimica Acta · 2026
DOI: 10.1007/s00604-025-07744-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microchimica Acta, 2026. Verfasst von Fengyun Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Natural Product Chemistry, Key Laboratory of Nonferrous Metals Chemistry and Resources Utilization of Gansu Province, College…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Interleukin-6, Lab-On-A-Chip Devices, Microfluidic Analytical Techniques. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
A portable, sensitive and low-cost immuno-detection microfluidic device for on-site application has been developed. The microfluidic device comprised a mask stereolithography (MSL)-based 3D-printed microfluidic chip and a handheld chemiluminescence reader. The MSL-fabricated microfluidic chip is characterized by its fast and economical prototype production process. Furthermore, the naturally generated micro-pits and micro-wavy structures during the printing process offered abundant surface area for antibody binding, which was beneficial for the assay sensitivity. The matched compact and lightweight chemiluminescence reader was designed for handheld use without compromising performance in signal intensity measurements, which were as sensitive as the commercial microplate reader. Employing this device, we developed a fast and simple detection workflow for the vital inflammation-related biomarker interleukin-6 (IL-6). Under suitable conditions, the device achieved a low limit of detection (LOD) of 0.5 pg/mL and a wide quantitative range from 0 to 800 pg/mL, covering the physiological levels of IL-6 in the human body. Moreover, validation studies involving 35 real samples and recovery analysis of IL-6-spiked serum samples confirmed the reliability and feasibility of the device for real-world applications. Capitalizing on its advantages, the microfluidic device demonstrates significant potential for on-site immunodetection applications in resource-limited settings.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Natural Product Chemistry, Key Laboratory of Nonferrous Metals Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou, 7…
- , Tianshui South Road, No. 222, Chengguan District, Lanzhou, 730000, Gansu Province, China. fyli@lzu.edu.cn.
- Department of Laboratory of Health Examination Center, The First Hospital of Lanzhou University, Lanzhou, 730000, Gansu, China.
- CAS Key Laboratory of Special Pathogens and Biosafety, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan, 430071, China. yujp@wh.iov.cn.
- University of Chinese Academy of Sciences, Beijing, 100049, China. yujp@wh.iov.cn.
- Gold Science & Technology, Park, Jinlong Street, No 262, Jiangxia District, Wuhan, 430207, Hubei Province, China. yujp@wh.iov.cn.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, F., Ai, J., Qu, Z., Gao, J., Ma, X., Chen, Y., & Yu, J. (2026). A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection. Microchimica Acta. https://doi.org/10.1007/s00604-025-07744-3
Vancouver
Li F, Ai J, Qu Z, Gao J, Ma X, Chen Y, et al. A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection. Microchimica Acta. 2026. doi:10.1007/s00604-025-07744-3
BibTeX
@article{Li2026,
author = {Li, Fengyun and Ai, Jiebing and Qu, Zhaowei and Gao, Jianye and Ma, Xiaoqin and Chen, Yihuang and Yu, Junping},
title = {A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection},
journal = {Microchimica Acta},
year = {2026},
doi = {10.1007/s00604-025-07744-3}
}
EUVIMED