EUVIMEDEUVIMED entdecken
Crossref

Ti3C2Fx/CuAl-LDH-based electrolyte-gated FET sensor for highly sensitive and label-free detection of salbutamol in biological fluids

Masoomeh Shaghaghi, Seyed Saman Nemati

Microchimica Acta · 2025-11 · 192 (11)

DOI: 10.1007/s00604-025-07635-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microchimica Acta, online erschienen am 25.10.2025. Verfasst von Masoomeh Shaghaghi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Payame Noor University, Tehran, Iran. m.shag2003d@yahoo.com. Hauptthemen laut MEDLINE: Albuterol, Transistors, Electronic, Electrochemical Techniques. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Salbutamol (Salb) is a short-acting β2-adrenergic receptor agonist prescribed as a bronchodilator for respiratory diseases and a doping drug requiring accurate and highly sensitive monitoring in biological fluids. In the present study, an electrolytic gate field-effect transistor (EGFET)-based electrochemical sensor was developed for the detection of Salb using Ti3C2Fx as the sensitive layer and CuAl layered double hydroxide (CuAl LDH) as the gate sensing layer. This sensor is designed to miniaturize the label-free and real-time sensing with high sensitivity by utilizing the catalytic ability of CuAl LDH and the change in concentration in the surface charge flux with high conductivity and excellent charge transfer of Ti3C2Fx. The proposed sensor can detect Salb in phosphate-buffered saline (PBS) and urine with detection limits of 7.228 nM and 8.214 nM, respectively. The sensor also showed exceptional sensitivity in PBS (0.693 μA/nM) and urine (0.884 μA/nM), distinguishing it from previous methods. The sensor demonstrated a recovery range of 85.78% to 103.32% over 14 days with a relative standard deviation (RSD) of 2.7%. Comprehensive assessment of stability, repeatability, interference, and performance across different pH levels validated its suitability for real-time, label-free detection of Salb in biological fluids.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlbuterolTransistors, ElectronicElectrochemical TechniquesHumansLimit of DetectionTitaniumHydroxidesElectrolytes

Stichwörter der Autor:innen

CuAl LDHEGFET sensorGate field-effect transistorReal-time biosensorSalbutamol detectionTi3C2Fx MXene

Substanzen

AlbuterolTitaniumHydroxidesElectrolytes

Autor:innen und Institutionen

  • Department of Chemistry, Payame Noor University, Tehran, Iran. m.shag2003d@yahoo.com.
  • Laboratory of Biochemistry and Molecular Biology, Department of Biology, Faculty of Natural Sciences, University of Tabriz, Tabriz, 51666-16471, Iran.

Zitieren

APA

Shaghaghi, M., & Nemati, S. S. (2025). Ti3C2Fx/CuAl-LDH-based electrolyte-gated FET sensor for highly sensitive and label-free detection of salbutamol in biological fluids. Microchimica Acta, 192(11). https://doi.org/10.1007/s00604-025-07635-7

Vancouver

Shaghaghi M, Nemati SS. Ti3C2Fx/CuAl-LDH-based electrolyte-gated FET sensor for highly sensitive and label-free detection of salbutamol in biological fluids. Microchimica Acta. 2025;192(11). doi:10.1007/s00604-025-07635-7

BibTeX
@article{Shaghaghi2025,
  author = {Shaghaghi, Masoomeh and Nemati, Seyed Saman},
  title = {Ti3C2Fx/CuAl-LDH-based electrolyte-gated FET sensor for highly sensitive and label-free detection of salbutamol in biological fluids},
  journal = {Microchimica Acta},
  year = {2025},
  volume = {192},
  number = {11},
  doi = {10.1007/s00604-025-07635-7}
}
Kostenlos starten →