EUVIMEDEUVIMED entdecken
Vergleichsstudie

Femoral neck osteosynthesis using interfragmentary compression or position screw in synthetic bones. What are the mechanical differences?

Arthur de Góes Ribeiro, Pedro Henrique Almeida, Fabio Raia, Ralph Walter Christian, José Octávio Soares Hungria, Cláudio Santili, Marcelo Tomanik Mercadante

European Journal of Orthopaedic Surgery & Traumatology · 2024

DOI: 10.1007/s00590-024-03988-6 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift European Journal of Orthopaedic Surgery & Traumatology, 2024. Verfasst von Arthur de Góes Ribeiro und 6 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedics and Traumatology Department, Irmandade da Santa Casa de Misericórdia de São Paulo, São Paulo, Brazil. arthurgr@gmail.com. Hauptthemen laut MEDLINE: Bone Screws, Fracture Fixation, Internal, Femoral Neck Fractures. Die Arbeit nennt 15 Literaturangaben. Gefördert von: Ortocir Ortopedia Cirurgia LTDA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: We aim to compare interfragmentary compression with the position osteosynthesis in the fixation of different femoral neck fractures (FN) in synthetic bones subjected to vertical load. METHODS: Forty-two synthetic femurs were subjected to neck fractures and separated into 3 groups according to the Pauwels classification: Pauwels I had 6 units (PI); Pauwels II, 24 units, with and without comminution (PII); and Pauwels III, 12 units, with and without comminution (PIII). After, they were fixed with 2 different ways: three 7, 0 mm cannulated lag screws (CSs) versus three 6, 5 mm solid fully threaded screws (SSs). Screws positioning was oriented by the Pauwels classification: inverted triangle or crossed screws. All specimens were submitted to vertical loading until failure. RESULTS: The average force was 79.4 ± 22.6 Kgf. The greatest one was recorded in model 1 (135.6 Kgf), and the lowest in model 41 (39.6 Kgf). CSs and SSs had similar resistance until failure (p = 0.2). PI showed heightened resistance and PIII showed a worse response (p < 0,01). CSs had better performance in PIII (p = 0.048). Comminution and screws orientation caused no difference on peak force (p = 0.918 and p = 0.340, respectively). CONCLUSIONS: In synthetic bones, the resistance of a femoral neck fracture osteosynthesis using a 7, 0 mm cannulated lag screw or 6, 5 mm solid fully threaded screw are similar. There was no loss of efficiency with comminution in the femoral neck. Osteosynthesis resistance decreased with the verticalization of the fracture line and, in the more vertical ones, interfragmentary compression with CSs was more resistant than positional osteosynthesis with SSs.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bone ScrewsFracture Fixation, InternalFemoral Neck FracturesHumansMaterials TestingBiomechanical PhenomenaWeight-BearingFractures, ComminutedStress, Mechanical

Stichwörter der Autor:innen

Femoral neck fracturesFemur fractureHip fracturesInternal fixation devicesInternal fracture fixationMechanical tests

Autor:innen und Institutionen

  • Orthopaedics and Traumatology Department, Irmandade da Santa Casa de Misericórdia de São Paulo, São Paulo, Brazil. arthurgr@gmail.com.
  • Orthopaedics and Traumatology Department, Irmandade da Santa Casa de Misericórdia de São Paulo, São Paulo, Brazil.
  • Mackenzie Presbiterian University, São Paulo, Brazil.

Förderung

  • Ortocir Ortopedia Cirurgia LTDA

Zitieren

APA

de Góes Ribeiro, A., Almeida, P. H., Raia, F., Christian, R. W., Hungria, J. O. S., Santili, C., & Mercadante, M. T. (2024). Femoral neck osteosynthesis using interfragmentary compression or position screw in synthetic bones. What are the mechanical differences?. European Journal of Orthopaedic Surgery & Traumatology. https://doi.org/10.1007/s00590-024-03988-6

Vancouver

de Góes Ribeiro A, Almeida PH, Raia F, Christian RW, Hungria JOS, Santili C, et al. Femoral neck osteosynthesis using interfragmentary compression or position screw in synthetic bones. What are the mechanical differences?. European Journal of Orthopaedic Surgery & Traumatology. 2024. doi:10.1007/s00590-024-03988-6

BibTeX
@article{deGesRibeiro2024,
  author = {de Góes Ribeiro, Arthur and Almeida, Pedro Henrique and Raia, Fabio and Christian, Ralph Walter and Hungria, José Octávio Soares and Santili, Cláudio and Mercadante, Marcelo Tomanik},
  title = {Femoral neck osteosynthesis using interfragmentary compression or position screw in synthetic bones. What are the mechanical differences?},
  journal = {European Journal of Orthopaedic Surgery & Traumatology},
  year = {2024},
  doi = {10.1007/s00590-024-03988-6}
}
Kostenlos starten →