EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-mechanical performance of FFF-printed PEEK gyroid lattice structures across the glass transition: implications for lightweight autoclave tooling

Francesco Pace, Elena Andreucci, Francesco Lambiase

The International Journal of Advanced Manufacturing Technology · 2026-07 · 145 (1-2) · 599-614

DOI: 10.1007/s00170-026-18366-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 28.05.2026. Verfasst von Francesco Pace und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi dell’Aquila.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused Filament Fabrication (FFF)-printed polyether-ether-ketone (PEEK) Gyroid lattice structures are promising candidates for lightweight autoclave tooling, yet their thermo-mechanical behavior across the glass transition temperature (Tg ≈ 143–150 °C) remains poorly characterized. This study presents a systematic experimental investigation of FFF PEEK Gyroid lattices at three relative densities (10%, 20%, 30%) under quasistatic compressive loading at 25 °C, 140 °C, 160 °C, and 200 °C. Post-printing thermal annealing effects were quantified by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA); sustained-load stability under autoclave-representative conditions was assessed via a purpose-designed spring-loaded fixture (12 h at temperatures up to 200 °C). Annealing raised crystallinity from 12.5% to 31.7% and increased storage modulus by ~ 17%. Compressive stiffness and yield strength decreased progressively with temperature, with a sharp transition above glass transition temperature Tg consistent with DMA measurements. Higher-density lattices retained superior load-bearing capacity and dimensional stability at all temperatures. These results provide quantitative guidelines for the design of FFF PEEK tooling subjected to combined thermal and mechanical loading.

Förderung

  • Università degli Studi dell’Aquila

Zitieren

APA

Pace, F., Andreucci, E., & Lambiase, F. (2026). Thermo-mechanical performance of FFF-printed PEEK gyroid lattice structures across the glass transition: implications for lightweight autoclave tooling. The International Journal of Advanced Manufacturing Technology, 145(1-2), 599-614. https://doi.org/10.1007/s00170-026-18366-1

Vancouver

Pace F, Andreucci E, Lambiase F. Thermo-mechanical performance of FFF-printed PEEK gyroid lattice structures across the glass transition: implications for lightweight autoclave tooling. The International Journal of Advanced Manufacturing Technology. 2026;145(1-2):599-614. doi:10.1007/s00170-026-18366-1

BibTeX
@article{Pace2026,
  author = {Pace, Francesco and Andreucci, Elena and Lambiase, Francesco},
  title = {Thermo-mechanical performance of FFF-printed PEEK gyroid lattice structures across the glass transition: implications for lightweight autoclave tooling},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {145},
  number = {1-2},
  pages = {599--614},
  doi = {10.1007/s00170-026-18366-1}
}
Kostenlos starten →