The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024
The International Journal of Advanced Manufacturing Technology · 2026-05 · 144 (1-2) · 467-480
DOI: 10.1007/s00170-026-17905-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 28.03.2026. Verfasst von Stepan Kolomy und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brno University of Technology.
Abstract (Originalsprache)
Currently a reduction of carbon emissions is one of the key things in the automotive industry. Thanks to the development of aluminium alloys, which possess favorable weight to strength ratio the reduction can be performed. Therefore, this study is focused on the mechanical behaviour and formability of the heat-treated AA2024 in sheet form with a thickness of 1 mm, which was tested under different strain rates. The microstructure in as-received (T3) state exhibited a tendency to create preferential orientation along the rolling direction. The grain size yielded an 4.9 % and 4.4 % increase in longitudinal and transverse planes after heat treatment (solution treatment and water quenching), respectively. The microstructure of AA2024-T3 consisted of numerous Al-Cu-Mn-Fe and Al-Cu-Mn precipitates, which corresponded to higher mechanical properties. The mechanical behaviour tested imminently after heat treatment manifested by yield strength decrease of 52.3 % under strain rate 0.0008 s –1 and 54.8 % under strain rate 0.18 s –1 , respectively. This phenomenon was caused by dissolution of precipitates and oversaturating α matrix with alloying elements. The heat-treated material featured a negative strain rate sensitivity, phenomenon that can be attributed to dynamic strain aging, which was further confirmed by the presence of the Portevin-Le Chatelier effect.
Förderung
- Brno University of Technology
Zitieren
APA
Kolomy, S., Doubrava, M., Harant, M., Chrast, D., Forejt, M., & Sedlak, J. (2026). The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024. The International Journal of Advanced Manufacturing Technology, 144(1-2), 467-480. https://doi.org/10.1007/s00170-026-17905-0
Vancouver
Kolomy S, Doubrava M, Harant M, Chrast D, Forejt M, Sedlak J. The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024. The International Journal of Advanced Manufacturing Technology. 2026;144(1-2):467-480. doi:10.1007/s00170-026-17905-0
BibTeX
@article{Kolomy2026,
author = {Kolomy, Stepan and Doubrava, Marek and Harant, Martin and Chrast, Daniel and Forejt, Milan and Sedlak, Josef},
title = {The effect of heat treatment and strain rate on the mechanical behaviour of aluminium alloy 2024},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {144},
number = {1-2},
pages = {467--480},
doi = {10.1007/s00170-026-17905-0}
}
EUVIMED