EUVIMEDEUVIMED entdecken
Crossref

Effect of Heat Treatment on the Strain Hardening Behaviour of an Al-Si-Cu Alloy

M. Frátrik, E. Kantoríková

Archives of Foundry Engineering · 30.03.2026 · 118-123

DOI: 10.24425/afe.2026.157977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 30.03.2026. Verfasst von M. Frátrik und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical behaviour of the AlSi9Cu1 alloy after T6 heat treatment, with a focus on its strain hardening response. Uniaxial tensile tests were conducted on heat-treated specimens to determine the strain hardening exponent n and the strength coefficient K. These parameters were subsequently used to assess the alloy’s potential for strain strengthening during mechanical surface treatments such as roller burnishing, shot peening, and grit blasting. The results indicate that specimens subjected to artificial aging within the peak-aged condition exhibited the highest values of strain hardening exponent n and strength coefficient K, implying the greatest capacity for strain hardening under plastic deformation. Conversely, the lowest hardening potential was observed in specimens exposed to overaged conditions, where both n and K were significantly reduced. These findings underscore the strong dependence of strain hardening behaviour on the thermal exposure parameters applied during aging.

Zitieren

APA

Frátrik, M., & Kantoríková, E. (2026). Effect of Heat Treatment on the Strain Hardening Behaviour of an Al-Si-Cu Alloy. Archives of Foundry Engineering, 118-123. https://doi.org/10.24425/afe.2026.157977

Vancouver

Frátrik M, Kantoríková E. Effect of Heat Treatment on the Strain Hardening Behaviour of an Al-Si-Cu Alloy. Archives of Foundry Engineering. 2026:118-123. doi:10.24425/afe.2026.157977

BibTeX
@article{Frtrik2026,
  author = {Frátrik, M. and Kantoríková, E.},
  title = {Effect of Heat Treatment on the Strain Hardening Behaviour of an Al-Si-Cu Alloy},
  journal = {Archives of Foundry Engineering},
  year = {2026},
  pages = {118--123},
  doi = {10.24425/afe.2026.157977}
}
Kostenlos starten →