EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Determining optimal laser engraving conditions for high-contrast and well-defined engraving on Kapur wood (Dryobalanops) using ImageJ

Mohd Shahir Kasim, Anuar Muhammad, Siti Nurul Akmal Yusof, Roslan Awang, Ruwaidy Mat Rasul, Wan Nor Fatihah Wan Mohamad, Raja Izamshah, Armansyah Ginting

The International Journal of Advanced Manufacturing Technology · 2025-11 · 141 (1-2) · 397-410

DOI: 10.1007/s00170-025-16670-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 10.10.2025. Verfasst von Mohd Shahir Kasim und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Higher Education Malaysia (KPM) through the HLP/CBBR DB program, Universiti Sultan Zainal Abidin.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser engraving is widely used in the furniture and souvenir industry to create high-contrast and durable markings on wood surfaces. However, achieving clean, sharp engravings without excessive burning remains a challenge due to the natural variability of wood. This study focuses on Kapur wood (Dryobalanops), a commercially important Southeast Asian hardwood, and aims to determine the optimal laser power and scanning speed settings for producing well-defined engravings. Using historical data of response surface methodology (RSM) and image analysis (ImageJ), the results show that the best engraving quality was achieved at 60 W and 160 mm/s, producing an 88% burn percentage with high contrast and sharp edges. The optimum process parameter was identified within the range power of 30–50 W and scanning speed of 120–200 mm/s, which provided consistently visible engravings with clear contrast. These findings provide practical information for industries using laser engraving, ensuring reliable quality for decorative and functional wooden products.

Förderung

  • Ministry of Higher Education Malaysia (KPM) through the HLP/CBBR DB program
  • Universiti Sultan Zainal Abidin

Zitieren

APA

Kasim, M. S., Muhammad, A., Yusof, S. N. A., Awang, R., Rasul, R. M., Mohamad, W. N. F. W., Izamshah, R., & Ginting, A. (2025). Determining optimal laser engraving conditions for high-contrast and well-defined engraving on Kapur wood (Dryobalanops) using ImageJ. The International Journal of Advanced Manufacturing Technology, 141(1-2), 397-410. https://doi.org/10.1007/s00170-025-16670-w

Vancouver

Kasim MS, Muhammad A, Yusof SNA, Awang R, Rasul RM, Mohamad WNFW, et al. Determining optimal laser engraving conditions for high-contrast and well-defined engraving on Kapur wood (Dryobalanops) using ImageJ. The International Journal of Advanced Manufacturing Technology. 2025;141(1-2):397-410. doi:10.1007/s00170-025-16670-w

BibTeX
@article{Kasim2025,
  author = {Kasim, Mohd Shahir and Muhammad, Anuar and Yusof, Siti Nurul Akmal and Awang, Roslan and Rasul, Ruwaidy Mat and Mohamad, Wan Nor Fatihah Wan and Izamshah, Raja and Ginting, Armansyah},
  title = {Determining optimal laser engraving conditions for high-contrast and well-defined engraving on Kapur wood (Dryobalanops) using ImageJ},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {141},
  number = {1-2},
  pages = {397--410},
  doi = {10.1007/s00170-025-16670-w}
}
Kostenlos starten →