EUVIMEDEUVIMED entdecken
Crossref

Laser Masking Using Multilayer Paperboard to Fabricate Well-Defined Laser-Induced Graphene Electrodes for Electrochemical Sensing of Heroin

Kasrin Saisahas, Asamee Soleh, Kritsada Samoson, Kiattisak Promsuwan, Jenjira Saichanapan, Kah Haw Chang, Warakorn Limbut

ACS Applied Nano Materials · 21.08.2026 · 9 (33) · 15899-15913

DOI: 10.1021/acsanm.6c02577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 11.08.2026. Verfasst von Kasrin Saisahas und 6 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: Prince of Songkla University, National Research Council of Thailand.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dimensionally controlled fabrication of laser-induced graphene (LIG) electrodes on cellulose-rich waste substrates remains challenging because lateral heat spreading during CO2 laser processing can broaden electrode features and reduce device-to-device reproducibility. Here, we report a waste-derived nanocarbon electrode platform in which postconsumer multilayer Tetra Pak cartons act simultaneously as the cellulose precursor and the processing architecture for intrinsic laser masking. The built-in polyethylene-aluminum laminate confines laser-induced graphitization to mechanically exposed paperboard regions, suppresses lateral carbonization, and yields TP-LIG features with a dimensional deviation of only ∼1.3%, compared with ∼17% for paper-LIG. After borax pretreatment and laser scribing (8.3 W, 80 mm s–1), TP-LIG was transferred by a water-assisted peel-off process onto adhesive tapes or disposable gloves, producing thin, flexible, ink-free three-electrode platforms. SEM/EDS and Raman analyses confirmed a porous, boron-containing graphene-like network, while electrochemical testing identified the face-down transferred electrode as the preferred interface because of its low charge-transfer resistance (Rct = 46 ± 7 Ω) and fast heterogeneous electron-transfer rate (keff0 = 3.65 × 10–3 cm s–1). As an application-oriented demonstration, the transTP-LIG electrode was used for square-wave voltammetric heroin sensing, providing two characteristic oxidation peaks and a quantitative peak II response over 2.0–800 μmol L–1 with a detection limit of 0.91 μmol L–1. Diluted artificial-urine spike-recovery experiments gave recoveries of 98.31–103.19% using peak II. This work introduces intrinsic laser masking as a simple route to high-fidelity, transferable LIG electrodes from multilayer packaging waste and demonstrates their utility for proof-of-concept electrochemical sensing of a forensic analyte in a simulated matrix.

Förderung

  • Prince of Songkla University
  • National Research Council of Thailand

Zitieren

APA

Saisahas, K., Soleh, A., Samoson, K., Promsuwan, K., Saichanapan, J., Chang, K. H., & Limbut, W. (2026). Laser Masking Using Multilayer Paperboard to Fabricate Well-Defined Laser-Induced Graphene Electrodes for Electrochemical Sensing of Heroin. ACS Applied Nano Materials, 9(33), 15899-15913. https://doi.org/10.1021/acsanm.6c02577

Vancouver

Saisahas K, Soleh A, Samoson K, Promsuwan K, Saichanapan J, Chang KH, et al. Laser Masking Using Multilayer Paperboard to Fabricate Well-Defined Laser-Induced Graphene Electrodes for Electrochemical Sensing of Heroin. ACS Applied Nano Materials. 2026;9(33):15899-15913. doi:10.1021/acsanm.6c02577

BibTeX
@article{Saisahas2026,
  author = {Saisahas, Kasrin and Soleh, Asamee and Samoson, Kritsada and Promsuwan, Kiattisak and Saichanapan, Jenjira and Chang, Kah Haw and Limbut, Warakorn},
  title = {Laser Masking Using Multilayer Paperboard to Fabricate Well-Defined Laser-Induced Graphene Electrodes for Electrochemical Sensing of Heroin},
  journal = {ACS Applied Nano Materials},
  year = {2026},
  volume = {9},
  number = {33},
  pages = {15899--15913},
  doi = {10.1021/acsanm.6c02577}
}
Kostenlos starten →