EUVIMEDEUVIMED entdecken
Open Access

Electrocoagulation and Hydrodynamic Cavitation, a Hybrid Process for Efficient COD Removal From Rice Mill Effluent

Puja Paramanik, Kulbhushan Samal, Swarup Ranjan Debbarma iD

Water Environment Research · 2026

DOI: 10.1002/wer.70555 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Environment Research, 2026. Verfasst von Puja Paramanik und 2 weiteren Autor:innen. Beteiligte Einrichtung: CSIR-Central Mechanical Engineering Research institute, Durgapur, West Bengal, India. Hauptthemen laut MEDLINE: Waste Disposal, Fluid, Biological Oxygen Demand Analysis, Oryza, Industrial Waste. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Central Mechanical Engineering Research Institute (CSIR-CMERI).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rice mill effluent (RME) typically exhibits high chemical oxygen demand (COD), total organic carbon (TOC), total suspended solids (TSS), and turbidity, which adversely affect the efficiency of cavitation‐based advanced oxidation processes (AOPs). In this study, electrocoagulation (EC) was employed as a preliminary treatment to improve effluent characteristics prior to hydrodynamic cavitation (HC) treatment. The EC operating parameters were maintained constant throughout all experiments. In the secondary treatment stage, multiple HC strategies were systematically evaluated, including standalone HC, HC with air injection, HC with air and hydrogen peroxide (H 2 O 2 ), and HC with air and sodium persulfate (Na 2 S 2 O 8 ). EC significantly improved RME characteristics by reducing TSS, turbidity, COD, and TOC, thereby enhancing effluent clarity. The improved effluent quality facilitated enhanced mass transfer, stable bubble formation and collapse, and improved cavitation efficiency during the subsequent HC process. Oxidant‐assisted HC significantly enhanced COD removal efficiency. Optimum dosages of H 2 O 2 (10 g/L) and Na 2 S 2 O 8 (3.0 g/L) achieved COD removal efficiencies of 88.8% and 90.7%, respectively. Apparent pseudo‐first‐order kinetic analysis confirmed enhanced degradation kinetics under optimum oxidant‐assisted conditions. The optimum H 2 O 2 ‐assisted HC process achieved a kinetic rate constant of 6.99 × 10 −3 min −1 , whereas Na 2 S 2 O 8 ‐assisted HC exhibited comparatively higher degradation kinetics with a rate constant of 9.28 × 10 −3 min −1 . CFD analysis further confirmed the formation of intense low‐pressure cavitation zones downstream of the venturi, supporting the experimentally observed enhancement in oxidation performance. Additionally, the synergistic interaction between EC and HC processes was confirmed through a synergy coefficient greater than unity. The laboratory‐scale integrated EC‐HC process demonstrated a promising approach for RME treatment. However, further validation through continuous‐flow operation, comprehensive water quality assessment (including TOC reduction and toxicity evaluation), energy optimization, and detailed techno‐economic analysis is required to establish its practical applicability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Waste Disposal, FluidBiological Oxygen Demand AnalysisOryzaIndustrial WasteHydrodynamicsHydrogen PeroxideWater Pollutants, ChemicalWastewaterOxidation-Reduction

Stichwörter der Autor:innen

RMEadvanced oxidation processchemical oxygen demandelectrocoagulationhydrodynamic cavitationhydrogen peroxidesodium persulfateventuri cavitationwastewater treatment

Substanzen

Hydrogen PeroxideIndustrial WasteWater Pollutants, ChemicalWastewater

Autor:innen und Institutionen

  • CSIR-Central Mechanical Engineering Research institute, Durgapur, West Bengal, India.
  • Academy of Scientific & Innovative Research (AcSIR), Ghaziabad, Uttar Pradesh, India.

ORCID-Profile: Swarup Ranjan Debbarma

Förderung

  • Central Mechanical Engineering Research Institute (CSIR-CMERI)

Zitieren

APA

Paramanik, P., Samal, K., & Debbarma, S. R. (2026). Electrocoagulation and Hydrodynamic Cavitation, a Hybrid Process for Efficient COD Removal From Rice Mill Effluent. Water Environment Research. https://doi.org/10.1002/wer.70555

Vancouver

Paramanik P, Samal K, Debbarma SR. Electrocoagulation and Hydrodynamic Cavitation, a Hybrid Process for Efficient COD Removal From Rice Mill Effluent. Water Environment Research. 2026. doi:10.1002/wer.70555

BibTeX
@article{Paramanik2026,
  author = {Paramanik, Puja and Samal, Kulbhushan and Debbarma, Swarup Ranjan},
  title = {Electrocoagulation and Hydrodynamic Cavitation, a Hybrid Process for Efficient COD Removal From Rice Mill Effluent},
  journal = {Water Environment Research},
  year = {2026},
  doi = {10.1002/wer.70555}
}
Kostenlos starten →