EUVIMEDEUVIMED entdecken
Crossref

Sequential electro‐coagulation and electro‐Fenton processes for the treatment of textile wastewater

Palak Agarwal iD, Vikas K Sangal iD, Sanjay Mathur

Water Environment Research · 2024

DOI: 10.1002/wer.11118 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Environment Research, 2024. Verfasst von Palak Agarwal und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Malaviya National Institute of Technology, Jaipur, India. Hauptthemen laut MEDLINE: Wastewater, Waste Disposal, Fluid, Water Pollutants, Chemical, Iron. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 51 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Textile wastewater, laden with persistent dyes and non‐biodegradable organics, poses a challenge for treatment in common effluent treatment plants (CETPs) using conventional methods. Pre‐treatment of textile effluents is essential to ensure compatibility with CETPs. The present study employed three‐dimensional (3D) aluminum and graphite electrodes for a sequential electro‐coagulation and electro‐Fenton (EC + EF) process. An experimental plan of 25 experiments was constructed using Taguchi method. The combination resulted in high removal efficiencies: 99.91% for color, 93.20% for chemical oxygen demand (COD), and 91.75% for total organic carbon (TOC) for the operating parameters; for EC, current density (J): 20 mA/cm 2 , time (t): 45 min, speed of rotation (N): 55 rpm; and for EF, current density (J): 25 mA/cm 2 , time (t): 50 min, iron concentration: 40 mg/L. Post‐treatment, the wastewater exhibited an enhanced biodegradability index of 0.875, rendering it suitable for CETPs. There was an increase of 11% in the total energy consumption when energy spent during rotation and aeration at the time of EC and EF, respectively, were considered. This energy increases the cost and is not accounted for, in previous research. The energy consumption in kWh per g of COD removed at optimum condition for the hybrid treatment was 0.0314, which is lower than the energy consumption by other electrochemical processes employing plate electrodes. This indicates that 3D electrodes are more energy efficient than plate electrodes. Practitioner Points Hybrid electrochemical processes can be used as pre‐treatment method for textile effluents. Three‐dimensional electrodes improve removal rates with lower energy consumption. Significant color, COD, and TOC abatement were noted post‐hybrid treatment of textile wastewater. Biodegradability of the textile effluent improves after the hybrid treatment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

WastewaterWaste Disposal, FluidWater Pollutants, ChemicalIronTextile IndustryIndustrial WasteElectrochemical TechniquesHydrogen PeroxideTextilesWater PurificationBiological Oxygen Demand Analysis

Stichwörter der Autor:innen

electro‐Fentonelectro‐coagulationhybrid treatmenttextile effluentthree‐dimensional electrodes

Substanzen

WastewaterWater Pollutants, ChemicalIronIndustrial WasteHydrogen Peroxide

Autor:innen und Institutionen

  • Department of Civil Engineering, Malaviya National Institute of Technology, Jaipur, India.
  • Department of Chemical Engineering, Malaviya National Institute of Technology, Jaipur, India.

ORCID-Profile: Palak Agarwal, Vikas K Sangal

Zitieren

APA

Agarwal, P., Sangal, V. K., & Mathur, S. (2024). Sequential electro‐coagulation and electro‐Fenton processes for the treatment of textile wastewater. Water Environment Research. https://doi.org/10.1002/wer.11118

Vancouver

Agarwal P, Sangal VK, Mathur S. Sequential electro‐coagulation and electro‐Fenton processes for the treatment of textile wastewater. Water Environment Research. 2024. doi:10.1002/wer.11118

BibTeX
@article{Agarwal2024,
  author = {Agarwal, Palak and Sangal, Vikas K and Mathur, Sanjay},
  title = {Sequential electro‐coagulation and electro‐Fenton processes for the treatment of textile wastewater},
  journal = {Water Environment Research},
  year = {2024},
  doi = {10.1002/wer.11118}
}
Kostenlos starten →