EUVIMEDSkopri EUVIMED
Crossref

Nitrogen and Recrystallization Effects in 316LN Steel: Microstructure Evolution and Cryogenic Deformation

Liyuan Zhao, Xiaolin Li, Ke Hua, Quan Xu, Haifeng Wang

steel research international · 2026-11-18

DOI: 10.1002/srin.70802 ↗

At a glance

Journal article in steel research international, published online on 2026-11-18. Written by Liyuan Zhao and 4 co-authors. 43 references. Funded by: National Science Foundation of China, State Key Laboratory of Solidification Processing.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Austenitic stainless steels (ASSs) are widely used in civilian and defense applications due to their excellent corrosion resistance and formability; however, their relatively low yield strength restricts cryogenic service. Here, 316LN steels with different nitrogen contents (0.38 wt.% HNS and 0.14 wt.% LNS) were processed by cryogenic rolling and annealing to obtain a series of recrystallization states (NPX, PRX, CRX, CRX*), enabling an evaluation of the effects of nitrogen alloying on microstructural evolution and room‐temperature mechanical properties. The deformation behavior at room and cryogenic temperatures was further investigated for the HNS. Higher nitrogen content is associated with a finer recrystallized microstructure and contributes to higher yield strength through combined solid‐solution and grain‐boundary strengthening. At room temperature, the PRX structure of HNS exhibits the best strength‐ductility combination, associated with effective strain partitioning and the coordinated activation of multiple deformation mechanisms. Under cryogenic conditions, the PRX structure exhibits pronounced deformation incompatibility, leading to early strain localization and reduced ductility, whereas the CRX structure undergoes more homogeneous deformation and retains superior cryogenic performance. The BCC phase observed near grain boundaries suggests that limited deformation‐induced martensitic transformation may contribute to cryogenic strengthening.

Funding

  • National Science Foundation of China
  • State Key Laboratory of Solidification Processing

Cite

APA

Zhao, L., Li, X., Hua, K., Xu, Q., & Wang, H. (2026). Nitrogen and Recrystallization Effects in 316LN Steel: Microstructure Evolution and Cryogenic Deformation. steel research international. https://doi.org/10.1002/srin.70802

Vancouver

Zhao L, Li X, Hua K, Xu Q, Wang H. Nitrogen and Recrystallization Effects in 316LN Steel: Microstructure Evolution and Cryogenic Deformation. steel research international. 2026. doi:10.1002/srin.70802

BibTeX
@article{Zhao2026,
  author = {Zhao, Liyuan and Li, Xiaolin and Hua, Ke and Xu, Quan and Wang, Haifeng},
  title = {Nitrogen and Recrystallization Effects in 316LN Steel: Microstructure Evolution and Cryogenic Deformation},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70802}
}
Start for free →