EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Static Recrystallization Behavior and Microstructure Evolution of SA-508M Gr.3 Steel

Chuang Mao, Mingze Liu, Lanjun Ren, Xinrui Wang, Lei Sun, Jinhao Liu, Hongyu Yi, Dapeng Gu, Xingang Liu

Metals · 25.06.2026 · 16 (7) · 699

DOI: 10.3390/met16070699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 25.06.2026. Verfasst von Chuang Mao und 8 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Engineering Research Center for Advanced Manufacturing Technology and Equipment of Heavy Castings and Forgings (Erzhong (Deyang) Heavy Equipment Co.,….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, double-pass hot compression tests were conducted to systematically investigate the effects of hot deformation parameters on the static recrystallization (SRX) behavior of SA-508M Gr.3 steel used for nuclear reactor pressure vessels. The deformation temperatures were set to 950, 1050, and 1150 °C, with strain rates of 0.01, 0.1, and 1 s−1. The first-pass strains were 0.05, 0.10, and 0.15; the inter-pass time was fixed at 60 s; and the second-pass strain was maintained at 0.05. Based on the experimental data, a kinetic model describing SRX softening behavior was established. The activation energy for SRX was determined to be 81.45 kJ·mol−1, and the Avrami exponent was 0.5742. The characteristic time for 50% recrystallization (t0.5) was quantified under different deformation conditions. In addition, the microstructural evolution of SRX after double-pass hot compression was characterized using electron backscatter diffraction (EBSD). The results show that increasing the deformation temperature and strain rate leads to opposite trends in the flow stress during double-pass deformation, with the flow stress decreasing with temperature and increasing with strain rate. Meanwhile, inter-pass static softening is enhanced, resulting in a pronounced stress drop during the second pass. An increase in the first-pass strain further intensifies the stress drop and enhances the extent of SRX. EBSD analysis reveals consistent microstructural evolution: with increasing deformation temperature, strain rate, and the first-pass strain, the misorientation distribution shifts from low-angle grain boundaries (LAGBs) to high-angle grain boundaries (HAGBs), indicating an increased degree of SRX. These findings provide a theoretical basis and experimental support for process parameter optimization and engineering applications of SA-508M Gr.3 steel.

Förderung

  • National Engineering Research Center for Advanced Manufacturing Technology and Equipment of Heavy Castings and Forgings (Erzhong (Deyang) Heavy Equipment Co.,…

Zitieren

APA

Mao, C., Liu, M., Ren, L., Wang, X., Sun, L., Liu, J., Yi, H., Gu, D., & Liu, X. (2026). Static Recrystallization Behavior and Microstructure Evolution of SA-508M Gr.3 Steel. Metals, 16(7), 699. https://doi.org/10.3390/met16070699

Vancouver

Mao C, Liu M, Ren L, Wang X, Sun L, Liu J, et al. Static Recrystallization Behavior and Microstructure Evolution of SA-508M Gr.3 Steel. Metals. 2026;16(7):699. doi:10.3390/met16070699

BibTeX
@article{Mao2026,
  author = {Mao, Chuang and Liu, Mingze and Ren, Lanjun and Wang, Xinrui and Sun, Lei and Liu, Jinhao and Yi, Hongyu and Gu, Dapeng and Liu, Xingang},
  title = {Static Recrystallization Behavior and Microstructure Evolution of SA-508M Gr.3 Steel},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {699},
  doi = {10.3390/met16070699}
}
Kostenlos starten →