EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Influence of Surface Roughness and Temperature on Niobium Cathodic Cage Duplex Treatment Applied to VP20TS Steel

Alan Bruno Costa Cardoso, Ediones Maciel de Sousa, João Rodrigues de Barros Neto, Leandro Almeida Silva, Luciana Sgarbi Rossino, Rômulo Ribeiro Magalhães de Sousa, Marcos Guilherme Carvalho Braulio Barbosa

steel research international · 2026-05-17

DOI: 10.1002/srin.70541 ↗

At a glance

Journal article in steel research international, published online on 2026-05-17. Written by Alan Bruno Costa Cardoso and 6 co-authors. 39 references. The full text is freely available (open access, CC BY 4.0). Funded by: Brazilian National Council for Research and Development, Brazilian Federal Agency for the Support and Evaluation of Graduate Education.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The use of VP20TS steel is widespread in industry, and continuous efforts to enhance the performance of this steel, coating deposition using the cathodic cage technique has emerged as an effective approach to improve surface properties. This study aims to analyze the modifications induced by the deposition of NbN coatings on VP20TS steel using the cathodic cage technique. A duplex treatment was applied to samples previously subjected to sanding with 800 and 1500 grit SiC paper. The treatments were carried out at temperatures of 350°C, 400°C, and 450°C. The samples were characterized by X‐ray diffraction, optical and scanning electron microscopy, roughness, microhardness, adhesion testing, and microwear analysis. Sanding the surfaces with coarser grit did not produce the expected mechanical anchoring or the consequent improvement in tribomechanical performance. The most significant results include the formation of nitride layers (NbN) in the samples subjected to treatment at 350°C and 450°C, as well as an increase in microhardness (approximately 150%). These conditions also led to the formation of a more uniform surface layer with a maximum thickness of 8.86 µm and an approximately tenfold reduction in wear volume for the sample treated at 400°C.

Funding

  • Brazilian National Council for Research and Development
  • Brazilian Federal Agency for the Support and Evaluation of Graduate Education

Cite

APA

Cardoso, A. B. C., Sousa, E. M. D., Neto, J. R. D. B., Silva, L. A., Rossino, L. S., Sousa, R. R. M. D., & Barbosa, M. G. C. B. (2026). Influence of Surface Roughness and Temperature on Niobium Cathodic Cage Duplex Treatment Applied to VP20TS Steel. steel research international. https://doi.org/10.1002/srin.70541

Vancouver

Cardoso ABC, Sousa EMD, Neto JRDB, Silva LA, Rossino LS, Sousa RRMD, et al. Influence of Surface Roughness and Temperature on Niobium Cathodic Cage Duplex Treatment Applied to VP20TS Steel. steel research international. 2026. doi:10.1002/srin.70541

BibTeX
@article{Cardoso2026,
  author = {Cardoso, Alan Bruno Costa and Sousa, Ediones Maciel de and Neto, João Rodrigues de Barros and Silva, Leandro Almeida and Rossino, Luciana Sgarbi and Sousa, Rômulo Ribeiro Magalhães de and Barbosa, Marcos Guilherme Carvalho Braulio},
  title = {Influence of Surface Roughness and Temperature on Niobium Cathodic Cage Duplex Treatment Applied to VP20TS Steel},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70541}
}
Start for free →