Gradient Nanostructure, Diffusion Mechanisms, and Performance of Fe–Si (6.5 wt.%) Alloy Powders Prepared Using a Green and Controllable Method
Small Methods · 2026-06 · 10 (12)
DOI: 10.1002/smtd.70677 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 29.04.2026. Verfasst von Rui Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Anhui University of Technology, Ma'anshan, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Youth Project of Anhui Provincial Natural Science Foundation, National Natural Science Foundation of China, Outstanding Youth Project of Anhui Province.
Abstract (Originalsprache)
To reduce carbon emissions associated with the traditional preparation of Fe–Si (6.5 wt.%) alloy powder, the main precursor of high‐frequency soft magnetic composites, this study developed a green, controllable, and melt‐free powder‐preparation methodology enabled by defect‐architecture engineering. Hydrogen‐reduced iron powders are first subjected to surface mechanical attrition treatment (SMAT) and subsequently processed via a dual‐stage heat‐treatment protocol, comprising low‐temperature Si infiltration at 565°C followed by homogenization at 900°C, to achieve rapid alloying and uniform silicon distribution. SMAT generated a gradient nanostructure through high‐strain‐rate deformation via dislocation multiplication and grain‐boundary rearrangement, providing short‐circuit diffusion paths that lowered the silicon infiltration temperature to 565°C. After homogenization at 900°C, silicon was evenly distributed throughout the prepared Fe–Si alloy powder. As proof of method, Fe–Si@boron nitride soft magnetic composites prepared from this material exhibited low power loss (201.5 kW/m 3 at 100 kHz and 50 mT), and high permeability retention (>80% under a 7.96 kA/m DC bias), outperforming mainstream commercial counterparts. Overall, this defect‐enabled route offers an energy‐efficient strategy for scalable low‐temperature diffusion alloying of metal powders and for fabricating high‐performance soft magnetic composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Anhui University of Technology, Ma'anshan, China.
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China.
ORCID-Profile: Zhaoyang Wu
Förderung
- Youth Project of Anhui Provincial Natural Science Foundation
- National Natural Science Foundation of China
- Outstanding Youth Project of Anhui Province
- Natural Science Foundation of Hunan Province
- Henan Provincial Science and Technology Major Project
Zitieren
APA
Wang, R., Zhao, X., Li, X., Kong, H., Sun, Z., Xia, A., & Wu, Z. (2026). Gradient Nanostructure, Diffusion Mechanisms, and Performance of Fe–Si (6.5 wt.%) Alloy Powders Prepared Using a Green and Controllable Method. Small Methods, 10(12). https://doi.org/10.1002/smtd.70677
Vancouver
Wang R, Zhao X, Li X, Kong H, Sun Z, Xia A, et al. Gradient Nanostructure, Diffusion Mechanisms, and Performance of Fe–Si (6.5 wt.%) Alloy Powders Prepared Using a Green and Controllable Method. Small Methods. 2026;10(12). doi:10.1002/smtd.70677
BibTeX
@article{Wang2026,
author = {Wang, Rui and Zhao, Xinyu and Li, Xiaoyu and Kong, Hui and Sun, Zengqing and Xia, Ailin and Wu, Zhaoyang},
title = {Gradient Nanostructure, Diffusion Mechanisms, and Performance of Fe–Si (6.5 wt.%) Alloy Powders Prepared Using a Green and Controllable Method},
journal = {Small Methods},
year = {2026},
volume = {10},
number = {12},
doi = {10.1002/smtd.70677}
}
EUVIMED